Sony BDV-E870 Operating Instructions Manual page 23

This connection sends a video signal to the TV.
Depending on the jacks on your TV, select the connection method.
Rear panel of the unit
O Component video
cable (not supplied)
t_ Video cord (supplied)
To the component To the video input To the HDMI IN jack
video input jacks of jack of the TV. of the TV.
the TV.
* The HDMI cable is supplied with BDV-E370 (Latin American models), BDV-T57, and BDV-T37 only.
Method 1: HDMI cable (O) connection
If your TV has an HDMI jack, connect to the TV with an HDMI cable. Picture quality will be improved
compared to using the component video cable connection or the video cord connection.
When connecting with the HDMI cable, you need to select the type of output signal (page 55).
Method 2: Component video cable (Q) connection
If your TV does not have an HDMI jack, but has component vide() input jacks, connect to the TV with
a component video cable. Picture quality will be improved compared to using the video cord
connection.
When connecting with the component video cable, you need to select the type of output signal (page
55).
Method 3: Video cord (0) connection
If you do not have an HDMI cable or a component vide() cable, temporarily make this connection.
23vs