Step 2: Connecting The System - Sony BDV-E770W/T77 Operating Instructions Manual

Step 2: Connecting the System

For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other
connections are made.
Note
• When you connect another component with a volume control, turn down the volume of the other components to a
level where sound is not distorted.
Connecting the speakers
The connector of the speaker cords and the color tube are color-coded depending on the type of speaker.
Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord
insulation (rubber covering) in the speaker terminals.
To connect speaker cords to the unit and surround amplifier
When connecting to the unit and surround amplifier, insert the connector until it clicks.
Rear panel of the unit
White
(Front left speaker (L))
K E R S
S P E A
C E N TE
O FE R
U B W O
T L S
F R O N
T R
F R O N
Red
(Front right
speaker (R))
To connect speaker cords to the speaker
Connector
R
Green
(Center speaker)
Purple
(Subwoofer)
Color tube
(+)
(–)
Rear panel of the surround amplifier
Gray
(Surround right speaker (R))
R
L
E U SE
D AN C
IM PE 3- 16
K E R S
S P E A
Blue
(Surround left speaker (L))
Rear or bottom of the speaker
17
US