Sony BDV-E870 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Home Theater System
  5. Bravia BDV-E870
  6. Operating instructions manual

Sony BDV-E870 Operating Instructions Manual

Blu-ray disc/dvd home theatre system
Hide thumbs Also See for BDV-E870:
Table of Contents

Advertisement

Quick Links

Blu-ray Disc/DVD
Home Theatre System
Operating Instructions
BDV-E870 / E570 / E470 / E370 / T57 / T37
© 2010 Sony Corporation
4-178-243-11(1)

Advertisement

Table of Contents
loading

Related Manuals for Sony BDV-E870

Summary of Contents for Sony BDV-E870

  • Page 1 4-178-243-11(1) Blu-ray Disc/DVD Home Theatre System Operating Instructions BDV-E870 / E570 / E470 / E370 / T57 / T37 © 2010 Sony Corporation...
  • Page 2 Refer to them whenever you exterior. apparatus with newspapers, call upon your Sony dealer tablecloths, curtains, etc. Do not regarding this product. Precautions place the naked flame sources such Model No.

  • Page 3: Important Safety Instructions

    ENERGY STAR If you have any questions about this apparatus (including is a U.S. registered product, contact Sony Customer amplifiers) that produce heat. mark. Information Service Center at 1- 9) Do not defeat the safety As an ENERGY 800-222-7669 or visit http:// ®...

  • Page 4: Copyrights And Trademarks

    Blu-ray Disc Association. copyright protection technology • “Blu-ray Disc” is a trademark. • “PhotoTV HD” and the “PhotoTV that is protected by U.S. patents HD” logo are trademarks of Sony • “Blu-ray Disc,” “DVD+RW,” and other intellectual property Corporation. “DVD-RW,” “DVD+R,” “DVD- rights.

  • Page 5: About These Operating Instructions

    BDs, DVDs, Super Audio CDs, or CDs unless otherwise specified by the text or illustrations. • The instructions in this manual are for BDV-E870, BDV-E570, BDV-E470, BDV-E370, BDV-T57, and BDV-T37. BDV-E870 is the model used for illustration purposes. Any difference in...

  • Page 6: Table Of Contents

    Table of Contents Settings and Adjustments About These Operating Instructions ..5 Unpacking ..........7 Using the Setup Display ....... 54 Index to Parts and Control ....10 [Network Update] ......... 54 Getting Started [Screen Settings]........54 [Audio Settings]........55 Step 1: Installing the System ..15 [BD/DVD Viewing Settings] ....

  • Page 7: Unpacking

    Unpacking BDV-E870 • Front speakers (2) • Subwoofer (1) • R6 (size AA) batteries (2) • Calibration mic (1) • FM wire antenna (aerial) (1) • Bases (2) • Speaker cords (3, blue/gray/ • Screws (6) green) • Speaker-bottom covers (2) •...
  • Page 8 BDV-E570/BDV-E470/BDV-T57 • Front speakers (2) • FM wire antenna (aerial) (1) • Operating Instructions • Quick Setup Guide • End user license agreement • Easy Setup Disc (DVD) For BDV-E570/BDV-T57 • Speaker cords (6, white/red/ • USB Wireless LAN Adapter •...
  • Page 9 BDV-E370/BDV-T37 • Front speakers (2) • Speaker cords (5, white/red/ • Operating Instructions blue/gray/green) • Quick Setup Guide • End user license agreement For U.S. and Canadian models • Easy Setup Disc (DVD) • Surround speakers (2) • Video cord (1) For BDV-E370 (Latin American models only)/BDV- •...

  • Page 10: Index To Parts And Control

    Index to Parts and Control For more information, refer to the pages indicated in parentheses. Front panel FUNCTION VOLUME VOLUME A "/1 (on/standby) (USB) port (page 33) Used for connecting a USB device. Turns on the unit, or sets it to standby mode. D Front panel display B Play operation buttons Z (open/close) (page 32)

  • Page 11: Front Panel Display

    Front panel display About the indications in the front panel display A Displays the current sound format. G Flashes when the sleep timer is set. (page 52) B Lights up when outputting 1920 × H S-AIR indicator (only when the wireless 1080p/24 Hz video signals.

  • Page 12: Rear Panel

    Rear panel Screws* VIDEO OUT LAN 100) COMPONENT VIDEO OUT EZW T100 SAT/CABLE SPEAKERS SPEAKERS DIGITAL N DIGITAL IN A CAL M C AUDIO ECM AC2 COAX AL AN ENNA FRONT R FRONT L SUBWOOFER CENTER SUR R SUR L CO XIAL OP ICAL AUD O IN...

  • Page 13: Remote Control

    B Number buttons (pages 41, 52) Remote control Enters the title/chapter numbers, radio frequencies, etc. AUDIO (pages 37, 38) Selects the audio format/track. ONE TOUCH THEATER PLAY SUBTITLE (page 56) BRAVIA Sync Selects the subtitle language when multilingual subtitles are recorded on a BD- SLEEP ROM/DVD VIDEO.
  • Page 14 F Playback operation buttons H DISPLAY (pages 32, 34) See “Playback” (page 32). Displays the playback information on the TV screen. ./> (previous/next) When the function is “TV” or “SAT/ Skip to the previous/next chapter, track, or CABLE” and digital signals are input via file.

  • Page 15: Getting Started

    Getting Started Step 1: Installing the System Positioning the speakers For the best possible surround sound, place all speakers at the same distance from the listening position (A). The distance can be between 0 to 23 feet (0.0 to 7.0 meters). If you cannot place the center speaker and surround speakers at the same distance as (A), place them within 23 feet (7.0 meters) of the listening position.

  • Page 16: Installing The Speakers On A Wall

    • Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. Before installing the front speakers of BDV-E870 on a wall, you need to disassemble the speakers. You can install the upper part of the speakers on a wall.
  • Page 17 To disassemble the speaker (Front speakers of BDV-E870 only) Disconnect the speaker cords from the speaker. Rear of the speaker Remove the screw (pre-installed) at the rear of the speaker. This screw is used when reassembling the speaker. Be sure not to lose the screw.
  • Page 18 Pull out the speaker cord from the bottom of the lower part of the speaker. The removed speaker cord is used when installing the speaker on a wall. Lower part of the speaker Speaker cord Remove the protection paper from the speaker-bottom cover, then attach the speaker- bottom cover to the bottom of the upper part of the speaker.
  • Page 19 To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Color tube Front left speaker (L): White Front right speaker (R): Red...
  • Page 20 Fasten the screws to the wall. BDV-E870 BDV-E570/BDV-E470/BDV- E370/BDV-T57/BDV-T37 For the front speakers For the center speaker 219 mm inches) 304 mm (12 inches) 8 to 10 mm inch) 8 to 10 mm inch) For the center speaker 219 mm...
  • Page 21 Hang the speakers on the screws. Hole on the back of 5 mm the speaker inch) 10 mm inch) Rear of the speaker...

  • Page 22: Step 2: Connecting The System

    Step 2: Connecting the System For connecting the system, read the information on the following pages. Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are made. Note •...

  • Page 23: Connecting The Tv (Video Connection)

    Connecting the TV (Video connection) This connection sends a video signal to the TV. Depending on the jacks on your TV, select the connection method. Rear panel of the unit B Component video cable (not supplied) O O U V I E P / C A HDMI cable* C O M...

  • Page 24: Connecting The Tv (Audio Connection)

    Connecting the TV (Audio connection) This connection sends an audio signal to the unit from the TV. To listen to TV sound via the system, perform this connection. Rear panel of the unit A L E TA L S A /C D IG A L IN D G IT...

  • Page 25: Connecting The Other Components

    Connecting the other components When you connect the system and other components to the TV, video signals from the system and the components are sent to the TV, and audio signals from the components are sent to the system as follows.

  • Page 26: Connecting The Antenna (Aerial)

    Connecting the antenna (aerial) To connect the antenna (aerial) Rear panel of the unit A N T E FM wire antenna (aerial) (supplied) Note • Be sure to fully extend the FM wire antenna (aerial). • After connecting the FM wire antenna (aerial), keep it as horizontal as possible. •...

  • Page 27: Connecting To The Network

    Although you can easily make settings, anyone Use a wireless LAN via the USB Wireless LAN can intercept wireless communication or intrude Adapter (Sony UWA-BR100* only) (supplied into your wireless network, even without any with BDV-E570 and BDV-T57). sophisticated tools. Keep in mind that there is a...

  • Page 28: Step 3: Performing The Easy Setup

    Connect the calibration mic to the Step 3: Performing the A.CAL MIC jack on the rear panel. Set up the calibration mic at ear level using Easy Setup a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction Before performing Step3 between the speakers and the calibration...

  • Page 29: Step 4: Selecting The Source

    Perform the [Easy Setup]. Follow the Step 4: Selecting the on-screen instructions to make the basic settings using C/X/x/c, and Source For details about [Auto Calibration] settings in [Easy Setup], see “Calibrating the Appropriate Settings Automatically” You can select the playback source. (page 49).

  • Page 30: Step 5: Enjoying Surround Sound

    Step 5: Enjoying Surround Sound After performing the previous Steps and starting playback, you can easily enjoy surround sound. You can also select pre-programmed surround settings that are tailored to different kinds of sound sources. They bring the exciting and powerful sound of movie theaters into your home. SYSTEM MENU X/x/c, Selecting surround settings based on your listening preference...
  • Page 31 Sound from Surround setting Effect “A.F.D. MULTI” • 2 channel source: The system simulates surround sound from 2 channel sources and outputs sound from the 5.1 (AUTO FORMAT DIRECT MULTI) channel speakers by duplicating 2 channel source sound across each speaker. •...

  • Page 32: Playback

    Delete unnecessary data in internal memory or Playback USB memory. Select [Erase BD Data] in [Video] to delete unnecessary data. If you Playing a Disc use USB memory as local storage, all saved data in the [BUDA/BUDB] folder is deleted. For playable discs, see “Playable Discs”...

  • Page 33: Playing From A Usb Device

    Playing from a USB Enjoying an iPod Device You can enjoy the sound and charge the battery of an iPod via the system. You can play video/music/photo files on the connected USB device. Compatible iPod models For playable types of files, see “Playable Types The compatible iPod models are as follows.

  • Page 34: Playing Via A Network

    • You cannot transfer songs onto the iPod. The control panel appears when the video file • Sony cannot accept responsibility in the event that starts playing. The displayed items may differ data recorded to iPod is lost or damaged when using depending on Internet content providers.

  • Page 35: Available Options

    [Add to Favorites] Adds an Internet content to slideshow (only for BDV- the Favorites List. E370 (Latin American [Remove from Erases an Internet content models), and BDV-E870). Favorites] from the Favorites List. [Rotate Left] Rotates the photo counterclockwise by 90 degrees.
  • Page 36 Adjusting the delay between the picture and sound (A/V SYNC) When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. Press SYSTEM MENU. Press X/x repeatedly until “A/V SYNC” appears in the front panel display, then or c.

  • Page 37: Sound Adjustment

    • When changing the sound mode while using the S-AIR receiver, sound from the S-AIR receiver may Sound Adjustment skip. • When you play a Super Audio CD, this function does Selecting the Effect to not work. Suit the Source Selecting the Audio You can select a suitable sound mode for movies or music.

  • Page 38: Enjoying Multiplex Broadcast Sound

    displayed two or more times, the BD/DVD VIDEO is recorded in multiple audio formats. x DVD-VR The types of sound tracks recorded on a disc are displayed. AUDIO Example: • [ Stereo] • [ Stereo (Audio1)] • [ Stereo (Audio2)] •...

  • Page 39: Reinforcing Bass Frequencies

    Press X/x repeatedly until “NIGHT MODE” appears in the front panel or c. display, then press Press X/x to select a setting. • “NIGHT ON”: On. • “NIGHT OFF”: Off. Press SYSTEM MENU. The system menu turns off. Note • When sound is output from the center speaker, this effect is more pronounced, as speech (movie dialog, etc.) is easy to hear.

  • Page 40: Tuner

    Adjust the volume by pressing VOL +/–. Tuner If an FM program is noisy Listening to the Radio If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. You can enjoy radio sound with the system’s speakers.
  • Page 41 Press X/x to select the preset number Selecting a radio station by you want. inputting a frequency directly When you know the frequencies, you can select radio stations by inputting the frequencies directly. • You can select the preset number directly by pressing the number buttons.

  • Page 42: External Audio Device

    Note • When you insert the wireless transmitter/transceiver, External Audio Device make sure that the AC power cord (mains lead) is not connected to a wall outlet (mains). Using an S-AIR Product • Do not touch the terminals of the wireless transmitter/ transceiver.
  • Page 43 S-AIR receiver, see the operating instructions of the S-AIR sub unit. ID A ID A • When you change the S-AIR configuration, Sony recommends that you perform [Auto Calibration]. To set the ID of the surround For details, see “Calibrating the Appropriate Settings amplifier Automatically”...
  • Page 44 Enjoying the system’s sound in Enjoying the S-AIR receiver another room while the unit is in standby mode For the S-AIR receiver For the S-AIR receiver You can enjoy the system’s sound in another room by using the S-AIR receiver. You can enjoy the S-AIR receiver while the unit Press HOME.
  • Page 45 Start pairing of the S-AIR sub unit. Identifying the unit with a x For the surround amplifier specific S-AIR sub unit Refer to the operating instructions of the surround amplifier. (Pairing operation) x For the S-AIR receiver For the surround amplifier Refer to the operating instructions of the For the S-AIR receiver S-AIR receiver.
  • Page 46 Press X/x to select [S-AIR Settings], then press The [S-AIR Settings] display appears. Press X/x to select [RF Change], then press Press X/x to select the desired setting, then press • [Auto]: Normally select this. The system changes [RF Change] to [On] or [Off] automatically.

  • Page 47: Other Operations

    • The Control for HDMI function may not work if you connect other than a Sony component, even if the Other Operations component is compatible with the Control for HDMI function. Using the Control for Preparing for the Control for...
  • Page 48 Press X/x to select the setting, then Enjoying TV sound from the press • [On]: On. speakers in this system • [Off]: Off. (System Audio Control) You can simplify operation to enjoy TV sound Turning the system off in sync via this system.

  • Page 49: Calibrating The Appropriate Settings Automatically

    Press HOME. Receiving the digital audio The home menu appears on the TV screen. signal of the TV Press C/c to select [Setup]. (Audio Return Channel) Press X/x to select [Audio Settings], The system can receive the digital audio signal then press of the TV via an HDMI cable when your TV is Press X/x to select [Auto Calibration],...

  • Page 50: Setting The Speakers

    Press Setting the Speakers [Auto Calibration] starts. The system adjusts the speaker settings automatically. [Speaker Settings] Be quiet during the measurement. To obtain the best possible surround sound, set connection of the speakers and their distance Note from your listening position. Then use the test •...
  • Page 51 [Subwoofer] [Yes] • You can change measurement units (feet or meters) by pressing the color button (RED). x [Distance] x [Level] When you move the speakers, be sure to set the parameters of the distance (A) from the You can adjust the sound level of the speakers. listening position to the speakers.

  • Page 52: Using The Sleep Timer

    Note • When you replace the batteries of the remote, the Press SLEEP. code number may reset itself to the default (SONY) Each time you press SLEEP, the minutes display setting. Reset the appropriate code number. (the remaining time) changes by 10 minutes.

  • Page 53: Saving Power In Standby Mode

    Saving Power in Standby Mode Check that the following settings are made: – [Control for HDMI] in [HDMI Settings] is set to [Off] (page 47). – [Standby] in [S-AIR Settings] is set to [Off] (page 44). – [Quick Start Mode] is set to [Off] (page 58).

  • Page 54: Settings And Adjustments

    You can update and improve the functions of the system. For information about update functions, refer to the following website: Setup http://www.sony.com/bluraysupport/ TV Type Set the screen aspect rat o of your TV Screen Format Orig nal DVD Aspect Ratio...

  • Page 55: [Audio Settings]

    • If no picture appears when setting [HDMI] or x [Screen Format] [Component Video] resolution, try another resolution [Original]: Select this when connecting to a TV setting. with a wide-mode function. Displays a 4:3 screen picture in 16:9 aspect ratio even on a x [BD/DVD-ROM 1080/24p Output] wide-screen TV.

  • Page 56: [Bd/Dvd Viewing Settings]

    [Off]: Outputs the primary audio only. Select [On]: Enables all of the system’s sound effects. this when outputting HD audio signals to an AV The upper limit of sampling frequency is set to receiver. 48 kHz. [Off]: The sound effects are disabled. Select this when you do not want to set the upper limit of x [Audio DRC] sampling frequency.

  • Page 57: [Parental Control Settings]

    Enter the code for your language by referring to x [DVD Parental Control] “Language Code List” (page 74). Playback of some DVD VIDEOs can be limited according to a predetermined level such as the x [BD Hybrid Disc Playback Layer] age of the users.
  • Page 58 [On]: Turns on the [Auto Standby] function. x [HDMI Settings] When you do not operate the system for about By connecting Sony components that are 30 minutes, the system enters standby mode compatible with the Control for HDMI function automatically.

  • Page 59: [Network Settings]

    [Manual]: Downloads disc information when For more information, go to you select [Playback History List] or http://www.sony.com/bluraysupport/ [Information Display] in the options menu. x [Network Connection Diagnostics] x [DivX® VOD] (Except for BDV-E370 (U.S. models)) (Except for U.S. models) You can run the network diagnostic to check if You can display the registration or the network connection has been made properly.

  • Page 60: Additional Information

    If you have any questions or problems concerning on the system. The system is equipped with a high your system, please consult your nearest Sony dealer. power amplifier. If the ventilation slots are blocked, the system can overheat and malfunction.

  • Page 61: Notes About The Discs

    Notes about the Discs IMPORTANT NOTICE Caution: This system is capable of holding a still video image or on-screen display image on your On handling discs television screen indefinitely. If you leave the still video image or on-screen display image displayed •...

  • Page 62: Troubleshooting

    Note that if service personnel changes some parts during repair, these parts may be retained. In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together (S-AIR main unit and sub unit).
  • Page 63 Symptom Problems and solutions Video signals are only output • Set [Output Video Format] in [Screen Settings] to [Component Video] from the HDMI OUT jack when (page 55). connecting the HDMI OUT jack and other video output jacks at the same time. The dark area of the picture is too •...
  • Page 64 Symptom Problems and solutions There is no digital sound from • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] the HDMI OUT jack when using (page 57). Also, set [Audio Return Channel] in [HDMI Settings] of [System the Audio Return Channel Settings] to [Auto] (page 57).
  • Page 65 Z. cord (mains lead) from the wall outlet (mains), then reconnect after several minutes. A disc cannot be ejected and • Contact your Sony dealer or local authorized Sony service facility. “TLK ON” appears in the front panel display.

  • Page 66: Usb Device

    Symptom Problems and solutions The Control for HDMI function • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] does not work. (page 57). • Make sure that the connected component is compatible with the [Control for HDMI] function.

  • Page 67: Network Connection

    • Picture/sound quality may be improved by changing the connection speed. detail, especially during fast- Sony recommends a connection speed of at least 2.5 Mbps for standard- motion or dark scenes. definition video and 10 Mbps for high-definition video.
  • Page 68 Other Symptom Problems and solutions “Exxxx” appears in the front • Contact your nearest Sony dealer or local authorized Sony service facility and panel display. give the error code. appears without any • Contact your nearest Sony dealer or local authorized Sony service facility.

  • Page 69: Playable Discs

    Note on playback operations of a Playable Discs BD/DVD Some playback operations of a BD/DVD may be intentionally set by software producers. Since Blu-ray Disc BD-ROM this system plays a BD/DVD according to the BD-R/BD-RE disc contents the software producers designed, some playback features may not be available.

  • Page 70: Playable Types Of Files

    • Some files edited on a PC may not play. Playable Types of Files • The system can recognize the following files or folders in BDs, DVDs, CDs and USB devices: – up to folders in the 5th tree Video –...

  • Page 71: Supported Audio Formats

    Supported Audio Formats Audio formats supported by this system are as follows. Format LPCM 2ch LPCM 5.1ch, Dolby Digital Dolby DTS-ES DTS-HD DTS-HD LPCM 7.1ch TrueHD, Discrete 6.1, High Master Function Dolby Digital DTS-ES Resolution Audio Plus Matrix 6.1, Audio DTS96/24 “BD/DVD”...

  • Page 72: Specifications

    108 W + 108 W (at 3 ohms, 1 kHz, 1% THD) Front/Surround (SS-TSB101) for BDV-E570/ BDV-E370/BDV-T37: BDV-E470/BDV-E370/BDV-T57/BDV-T37 POWER OUTPUT (reference) Surround (SS-TSB101) for BDV-E870 Front L/Front R/Center/Surround L/Surround R: Speaker system Full range Bass reflex 142 W (per channel at 3 Speaker unit 55 mm ×...
  • Page 73 × Mbps in) (w/h/d) 802.11n: up to 300 Mbps Mass (approx.) 0.28 kg (10 oz) (40 MHz/spatial streams: Subwoofer (SS-WSB101) for BDV-E870/ Power consumption: Tx: up to 500 mA BDV-E370/BDV-T37 Mass (Approx.): USB Wireless LAN Speaker system Subwoofer Bass reflex...

  • Page 74: Language Code List

    Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language Code Language Code Language 1027 Afar 1183 Irish 1347 Maori 1507 Samoan 1349 Macedonian 1508 Shona 1028 Abkhazian 1186 Scots Gaelic 1032 Afrikaans 1194 Galician 1350 Malayalam 1509 Somali...

  • Page 75: Glossary

    * A high definition specification that utilizes 1080 Digital Cinema Auto Calibration was developed effective scanning lines and the interlace format. by Sony to automatically measure and adjust the ** A high definition specification that utilizes 720 speaker settings to your listening environment in effective scanning lines and the progressive format.
  • Page 76 The good channel separation is realized due to pictures, and photo-like expression of subtle the all channel data being recorded discretely textures and colors. By connecting Sony and processed in digitally. “PhotoTV HD” compatible devices using an DTS-HD High Resolution Audio...
  • Page 77 To ensure that the subtle nuances of these high- quality media are transmitted with no deterioration, Sony has developed a technology called “S-AIR” for the radio transmission of digital audio signals with no compression, and has incorporated this technology into the EZW- RT10/EZW-RT10A/EZW-T100.

  • Page 78: Index

    Index Numerics Dolby Surround Pro Logic 76 Dolby TrueHD 76 24p True Cinema 77 OSD 57 DTS 37, 76 Output Video Format 55 DTS-HD 76 DVD 69 A/V SYNC 36 DVD Aspect Ratio 55 Attenuate - AUDIO 56 Parental Control 76 DVD Parental Control 57 Audio 56 Parental Control Area Code 57...
  • Page 79 Surround amplifier 42 System Information 59 SYSTEM MENU 30, 36, 38, Test Tone 51 TV Type 54 Update 54 USB 33 WEP 27 WPA2-PSK (AES) 27 WPA2-PSK (TKIP) 27 WPA-PSK (AES) 27 WPA-PSK (TKIP) 27...
  • Page 80 The software of this system may be updated in the future. To find out details on any available updates, please visit: http://www.sony.com/bluraysupport/ Printed in Malaysia...
  • Page 81 (suministrado solamente con los modelos de EE. UU. y Canadá). BDV-E870/E570/E470/E370/T57/T37 For details, refer to the Operating Instructions. Si desea obtener más información, consulte el Manual de ©2010 Sony Corporation Printed in Malaysia instrucciones. Connect the speakers/Conexión de los altavoces Connect your TV/cable box/Conexión del televisor/descodificador de cable Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.
  • Page 82 Connect the AC power cords/ Perform “Easy Setup”/ Play a disc/ Conecte los cables de alimentación de ca Realización de la “Configuración fácil” Reproducción de discos Connect the AC power cords ( ), and Do not insert a disc before performing the “Easy Setup”. turn on the power ( ).

This manual is also suitable for:

Bdv- t57Bdv-t37Bdv-e370Bdv-e570Bdv-e470

Table of Contents