Step 2: Connecting The System; Connecting The Speakers - Sony BDV-N9900SH Operating Instructions Manual

Note
• Be sure to select the speakers layout setting
(page 47) according to your speakers
placement.
• Use caution when placing the speakers and/or
speaker stands attached to the speakers on a
specially treated (waxed, oiled, polished, etc.)
floor, as staining or discoloration may result.
• Do not lean or hang on a speaker, as it may fall
down.
• The speakers of this system are not magnetically
shielded. This may result in color irregularity
when they are placed near a CRT TV or
projector.
Tip
• In order to output more effective sound when
[All Front] setting is selected, we recommend
you to install your front speakers and surround
speakers closer to each other.
• You can install the speakers on a wall. For
details, refer to the supplied "Speaker
Installation Guide".
Step 2: Connecting the
System
Do not connect the AC power cord (mains
lead) of the main unit to a wall outlet
(mains) until all the other connections are
made.
To assemble the speakers, refer to the
supplied "Speaker Installation Guide".
Note
When you connect other equipment with a
volume control, turn down the volume of the
equipment to a level where sound is not distorted.
GB
18
Connecting the
speakers
Connect the speaker cords to match the
color of the SPEAKERS jacks of the main
unit and surround amplifier.
When connecting to the main unit and
surround amplifier, insert the connector
until it clicks.
To the main unit
Red
(Front right
speaker (R))
White
(Front left
speaker (L))
Purple
(Subwoofer)
Green
(Center
speaker)