Sony BDV-E870 Operating Instructions Manual page 73

Dimensions (approx.) 290 mmx 49 mmx 49 mm
(11 1/2in x 1 15/u, in ×
1 15/l<. i n) (w/h/d)
Mass (approx.) 0.28 kg (10 oz)
Subwoofer (SS-WSB101) for BDV-E870/
BDV-E370/BDV-T37
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Subwoofer Bass reflex
160 mm (63/8 in) cone type
3 ohms
260 mm× 320 mm × 260
mm (10 I/4 in x 12 5/s in x
10 */4 in) (w/h/d)
5.2 kg (11 lb 8 oz)
Subwoofer (SS-WSB102) for BDV-E570/
BDV-E470/BDV-T57
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
General
Power requirements
Subwoofer Bass reflex
180 mm (7 % in) cone type
3 ohms
275 mm× 405 mm× 275
mm (10 718 in x 16 in x
10 718in) (w/h/d)
7.5 kg (16 lb 12 oz)
North American and Mexican models:
120 V AC, 60 Hz
Latin American models: 1 l0 V - 240 V AC,
50160 Hz
Power consumption On: 170 W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.) 430 mmx 85 mmx 335
mm (17 iri x 3 318in x
13 */4 in) (w/h/d) incl.
projecting parts
Mass (approx.) 4.8 kg (10 lb 10 oz)
USB Wireless LAN Adapter (UWA-BR100)
for BDV-E570/BDV-T57
Standards Compliance: IEEE 802.1 I atblgln
Host Interface: USB 2.0
Security: 64/128 bit: WEP, WPA/
WPA2, WPS
Frequency and Channel*: 2.4 GHz - 2.4835 GHz
[CHI - 11]
5.15 GHz - 5.25 GHz
[CH36 - 481
5.25 GHz - 5.35 GHz
[CH52 - 641
5.47 GHz - 5.725 GHz
[CH100- 1401
5.725 GHz - 5.85 GHz
[CH149- 1651
Data Rate**: 802.1 la/g: 54, 48, 36, 24,
18, 12,9and6Mbps
802.11b:ll,5.5,2andl
Mbps
802.1 In: up to 300 Mbps
(40 MHz/spatial streams:
2)
Power consumption: Tx: up to 500 mA
Mass (Approx.): USB Wireless LAN
Adapter: 27 g (1 oz)
Dimensions (Approx.) (w x h x d):
USB Wireless LAN
Adapter: 96 mm x 14 mm
x 27 mm (3 7/s in x 9/16in x
1 l/s in)
* The frequency and channel differ depending on the
area.
** The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of
products, the radio wave conditions, the line trafl'ic,
and the products that you use. The transmission may
also be cut off depending on the radio wave
conditions. The standard values of the transmission
speed are the theoretical maximum values for the
wireless standards. They arc not the actual speeds of
data trausmission.
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3 W.
• Hah)genated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
1}
u,
o
-.I
o
&
o
73us