Quick Reference Table - Supermicro X13SCL-IF User Manual

Super X13SCL-IF User's Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JNS1 SATA 3.0 or PCIe 4.0 Selection
JPG1 VGA Enable/Disable
JPL1 LAN1 Enable/Disable
JPL2 LAN2 Enable/Disable
JPME2 Manufacturing Mode
JRF1 CPU PCIe Bifurcation
JWD1 Watch Dog Timer
LED Description
LED1 Overheat/Power Fail/Fan Fail LED
LED2 UID LED
LED3 Onboard Power LED
LEDM1 BMC Heartbeat LED
Connector Description
BMC_LAN Dedicated BMC LAN Port
BT1 Onboard Battery
COM1 COM Port
FAN1–FAN3, FANA System Fan Headers (FAN1: CPU Fan)
I-SATA4, I-SATA5 Intel PCH SATA 3.0 Ports (RAID 0, 1, 5, 10)
JD1 Speaker
JF1 Front Control Panel Header
JL1 Chassis Intrusion Header
JPI²C1 Power I
JPW1 24-pin ATX Power Connector
JPW2 4-pin Power Connector
JSMB1 System Management Bus Header
JTPM1 Trusted Platform Module/Port 80 Connector
JUIDB1 UID Switch
LAN1/2 Gigabit Ethernet RJ45 Ports
M.2-C M.2 PCIe 4.0 x4 Slot (supports 2280 form factor)
MH1–MH4 Mounting Holes
SLOT7 PCIe 5.0 x16 Slot
USB0/1 Back Panel USB 2.0 Ports
Note: Table is continued on the next page.
C System Management Bus (Power SMB) Header
2
12
Default Setting
Open (Normal)
Pins 1–2 (4x SATA)
Pins 2–3 (PCIe x4)
Pins 1–2 (Enabled)
Pins 1–2 (Enabled)
Pins 1–2 (Enabled)
Pins 1–2 (Normal)
Pins 1–2 (JPCIE x16)
Pins 1–2 (Reset)
Status
Solid Red: System Overheat
Blinking Red: Power Fail or Fan Fail
Solid Blue: Unit Identified
Solid Green: Power On
Blinking Green: Device Working