Table of Contents
Advertisement
Programmable Preparations
You can program the following functions by using the handset near the
base unit. See the noted pages for details.
The TALK and DIGITAL SP-PHONE indicator lights must be off
before programming.
Lift the handset, then press
(PROGRAM/2WAY REC).
y
Press
(SCREEN/PLAYBACK).
elf an alarm tone sounds, move
towards the base unit, then try again.
To adjust the time and day, press (0).
(page 15)
To set the remote code, press (1).
(page 37)
To select the number of rings, press (2).
(page 17)
To set the CPC function, press (3).
(page 18)
To set the greeting monitor function, press (4).
(page 18)
To select the caller's recording time, press (5).
(page 16)
To store the pager number, press (+).
(page 34)
When finished, press
(PROGRAM/2WAY REC).
eA confirmation tone sounds.*
eTo cancel during programming, press (PROGRAM/2WAY REC), then start |
from the beginning.
elf 6 beeps sound during programming, a wrong key was pressed.
Enter the correct number again.
* What the confirmation tone means
1 beep:
The new programmed number is stored.
2 beeps: The number is the same as the previously stored one.
6 beeps: The number is not correct. Try again from the beginning.
If a power failure occurs, the setting will return to the factory preset.
Reprogram if necessary.
14
Advertisement
Table of Contents
