Channels - Philips 56PFL9954H - User Manual

4.1.4 Ambilight
In the Ambilight menu, you can adjust all
Ambilight settings individually.
Press h > Setup > Ambilight.
Use w or x, u or v to select and adjust a
setting. Press OK to activate a setting.
For more on Ambilight, read 2.4 Use Ambilight.
4.1.5 Factory settings
You can return to the original factory settings.
Only picture, sound and Ambilight settings will
be reset.
Press h > Setup > Installation > Factory reset
and press OK.

4.2 Channels

4.2.1 Reorder and rename
After the fi rst installation, you might want to
reorder or rename installed channels.
Organise TV channels in the Channel overview
according to your own preference or give them
a recognisable name.
While watching TV, press OK to open the
Channel overview. The Channel overview shows
the TV channels and radio stations installed on
your TV.
To reorder or rename, press Options o and
select the option you need.
Reorder
You can reposition channels within the overview.
Select Reorder in the Options o menu to
1
start reordering channels.
2 Highlight a channel and press OK.
3 Reposition the channel where you want it
with the navigation keys.
Press OK to confi rm the position.
4
You can highlight another channel and do the
same.
To stop Reorder, press Options o and select
Exit reorder.
UM_Bombay_56PFL9954_en.indd 39 UM_Bombay_56PFL9954_en.indd 39
Rename
You can rename a channel.
1 In the channel overview, navigate to the
channel you want to rename.
Select Rename in the Options o menu.
2
3 Use the navigation keys to position the
highlight. Press Back b to delete a character.
Use the remote control number pad as
you do for SMS/text messaging to select a
character. Use the 0 number key to select a
special character.
Select Clear to clear all text.
4 Select Done and press OK to end Rename.
4.2.2 Update channels
When the TV was switched on for the fi rst time,
a full installation of channels was performed.
You can set the TV to add or remove digital
channels automatically. You can also manually
start the channel update.
Automatic update
To set the TV to update digital TV channels
automatically, leave the TV in standby mode.
Once a day, at 6 AM, the TV updates earlier
found channels and stores new channels.
Empty channels are removed from the Channel
overview.
If a channel update has been performed, a
message shows at TV start up.
If you do not want this message to appear, select
No in h > Setup > Installation > Channel
installation > Channel update message.
Manual update
To update channels yourself at any time,
press h > Setup > Installation > Channel
installation > Automatic installation and press
OK.
Start the update and select Update Channels.
The update may take a few minutes.
39
2009-06-30 10:19:45 2009-06-30 10:19:45