Philips 56PFL9954H - User Manual page 14

Setup for a particular device
To start the Universal mode key setup in the
Home menu, press h > Setup > Installation >
Universal remote control and press OK.
Follow the instructions on screen.The TV will
search for a suitable RC code for your device.
When an RC code is found, you can try out the
remote control keys for this device. If not all keys
work, you can continue the search.
In some cases, there are no suitable RC codes
available for some devices.
Manual setup
You can manually enter an RC code to set up a
Universal mode key. Look up the appropriate RC
code in the Universal RC code list in this user
manual. In the list, look for the type of device
and brand you need. Some brands have several
RC codes available. When setup is performed
manually, try to operate the device with the
relevant keys. If the device does not respond or
operates incorrectly and there is more than 1
code available, you can restart the manual setup
using another RC code.
To enter an RC code manually
1 Press the Universal mode key you want to
set up, DVD, STB or HTS and press this key
together with the OK key for 4 seconds
simultaneously. All 4 keys light up for 1
second and the key you are setting stays lit.
2 Enter the 4-number RC code you found in
the list.
3 If the code is accepted, all 4 keys blink 3
times. If you entered a code that does not
exist, all keys blink for 2 seconds. You can re-
enter a code.
4 If the code is accepted, the Universal mode
key is set up.
12
UM_Bombay_56PFL9954_en.indd 12 UM_Bombay_56PFL9954_en.indd 12
‹ Warning
To avoid the loss of stored Universal remote
control codes, do not leave the remote control
without battery power for more than 5 minutes.
Also during the replacement of the batteries, do
not press any remote control key.
Dispose of batteries according to the end of use
directives. Read 1.1.7 End of use.
2.1.3 Universal RC code list
Use Manual setup to enter an RC code from the
list hereafter. Read 2.1.3 Universal RC code list.
To setup the DVD key, fi rst fi nd the RC code
for your DVD or Blu-ray Disc player in the DVD
codes list.
See the lists for Digital receiver or Satellite
receiver to setup the STB key.
To setup the HTS key, see the list for Home
Theatre System.
Write down the codes for your brand and device
and try out the codes one by one until the setup
is successful.
2009-06-30 10:19:38 2009-06-30 10:19:38