Philips 56PFL9954H - User Manual page 46

Identifi cation
1
Press h > Setup > Software update >
Update now and press OK. Select USB and
press OK.
Follow the onscreen instructions.
The TV will ask to insert the USB device into
the USB connector at the side of the TV.
Download from PC to USB
2
Once the TV identifi cation fi le is written to
the USB device, insert the USB into your
PC that is connected to the Internet. On
the USB device, locate the fi le update.htm
and double-click it. Click on Send ID. If new
software is available it will download to the
USB device.
3 Download from USB to TV
Insert the USB memory device back into
the TV. Follow the onscreen instructions to
start the new TV software update. The TV
switches off for 10 seconds and back on
again. Please wait.
Do not ...
• use the remote control
• remove the USB device from the TV during
the software update
If a power cut occurs during the update, never
remove the USB memory device from the TV.
When the power returns, the update continues.
At the end of the update, the message
Operation successful appears on screen.
Remove the USB device and press O on the
remote control.
Do not ...
• press O twice
• use the O switch on the TV
The TV switches off (for 10 seconds) and back
on again. Please wait.
Now the new TV software update is fi nished
You can use the TV again.
44
UM_Bombay_56PFL9954_en.indd 44 UM_Bombay_56PFL9954_en.indd 44 2009-06-30 10:19:46 2009-06-30 10:19:46