Bosch Professional GOP 18V-34 Original Instructions Manual page 18

18 | English
Keep hands away from the sawing area. Do not reach
u
under the workpiece. Contact with the saw blade can
lead to injuries.
Clean the air vents on your power tool regularly. The
u
motor's fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
When changing the accessory, wear protective
u
gloves. Accessories can become hot when used for pro-
longed periods of time.
Do not scrape any dampened materials (e.g. wallpa-
u
per) or on damp surfaces. Water entering a power tool
increases the risk of electric shock.
Do not treat the surface you will be working on with
u
any fluids that contain solvents. Poisonous vapours
may develop due to the materials heating up when being
scraped.
Take particular care when handling scrapers and
u
blades. The accessories are very sharp. Danger of injury.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery in the manufacturer's products.
u
This is the only way in which you can protect the battery
against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
1 609 92A 8RD | (07.08.2023)
Intended use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. non-hardened nails, clamps). It
is also suitable for working on soft wall tiles, removing joints
and dry sanding and scraping of small areas. It is ideal for
working close to edges and flush with surfaces. The power
tool must only be operated using Bosch accessories.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle (insulated gripping surface)
(2) On/off switch
a)
(3) Rechargeable battery
(4) Rechargeable battery release button
(5) Ventilation slots
(6) Orbital stroke rate preselection thumbwheel
(7) Starlock lever for unlocking tools
(8) Tool holder
(9) Worklight
a)
(10) Depth stop
(11) Clamping lever for depth stop
a)
(12) Plunge cut saw blade
(13) Dust extraction system without click connection
(14) Dust extraction system with click connection
a)
(15) Sanding plate
a)
(16) Abrasive disc
(17) Clamping lever for dust extraction system
a)
(18) Extraction outlet
a)
(19) Dust extraction adapter
a)
(20) Extraction hose
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless multi-cutter
Article number
Rated voltage
No-load speed n₀
Oscillation angle on left/right
Weight according to EPTA-Pro-
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
B)
during operation and during
storage
a)
a)
a)
a)
a)
GOP 18V‑34
3 601 HG2 0..
V= 18
−1
min 10000–20000
° 1.7
A)
kg 1.5−2.6
°C 0 to +35
°C −20 to +50
Bosch Power Tools