Table of Contents
Advertisement
Suunto Ambit3 Peak
switches to measuring altitude, when needed. When altitude is shown, it is updated with a
maximum delay of 10 seconds.
If you are at a constant altitude (less than 5 meters of vertical movement within 12 minutes),
Suunto Ambit3 Peak interprets all pressure changes as weather changes. The measurement
interval is 10 seconds. The altitude reading remains steady and if the weather changes, you
will see changes in the sea level air pressure reading.
If you are moving in altitude (more than 5 meters of vertical movement within 3 minutes),
Suunto Ambit3 Peak interprets all pressure changes as movements in altitude.
Depending on which profile is active, you can access the Altimeter or Barometer profile
views with [View] .
NOTE: When you are using the Automatic profile, barometer or altimeter icons are not
shown on the display.
3.4. Autopause
Autopause pauses the recording of your exercise when your speed is less than 2 km/h (1.2
mph). When your speed increases to more than 3 km/h (1.9 mph), the recording continues
automatically.
You can turn Autopause on/off for each sport mode in Movescount under the advanced
settings for the sport mode.
You can also turn Autopause on/off during exercise without any effect on your Movescount
settings.
To turn Autopause on/off during exercise:
1. While you are in a sport mode, keep [Next] pressed to access the options menu.
2. Scroll to ACTIVATE with [Light Lock] and select with [Next] .
3. Scroll to Autopause with [Start Stop] and select with [Next] .
4. Toggle on/off with [Start Stop] or [Light Lock] .
5. Keep [Next] pressed to exit.
3.5. Autoscroll
Set your watch to automatically scroll through your sport mode displays while exercising by
using Autoscroll.
In Movescount, you can turn Autoscroll on/off for each sport mode and define how long the
displays are shown.
You can also turn Autoscroll on/off during exercise without any effect on your Movescount
settings.
To turn Autoscroll on/off during exercise:
1. While you are in a sport mode, keep [Next] pressed to access the options menu.
2. Scroll to ACTIVATE with [Light Lock] and select with [Next] .
3. Scroll to Autoscroll with [Start Stop] and select with [Next] .
4. Toggle on/off with [Start Stop] or [Light Lock] .
5. Keep [Next] pressed to exit.
14
Advertisement
Table of Contents
