Suunto Ambit3 Peak
20.9
16:30
Tuesday
Charge the battery by attaching it to your computer with the supplied USB cable, or charge
with a USB-compatible wall charger. It takes approximately 2-3 hours to fully charge an empty
battery.
TIP: Go to Movescount to change the GPS fix interval of your sport modes to save battery
life. For more information, see 3.22.3. GPS accuracy and power saving.
4.4. Replacing Smart Sensor battery
The Suunto Smart Sensor uses a 3-Volt lithium cell (CR 2025).
To replace the battery:
1. Remove the sensor from the belt strap.
2. Open the battery cover with a coin.
3. Replace the battery.
4. Firmly close the battery cover.
1.
2.
60
100%
< 10%
76-100%
30sec
51-75%
26-50%
< 2%
0-25%
3.
4.