Toshiba RAS-24J2KVG-UA Service Manual page 96

No. Part name
8 Drain pan 1) Follow the procedure item
2) Remove screw holding the electric part
assembly
3) Disconnect the louver motor connector (5P)
4) Remove fixing screw of the unit display
and remove unit display.
5) Remove drain pan can be selected remove
<To re-installation>
Procedures
cover.
from P.C. board assembly.
L N 1 2 3
P.C.board
drain hose or not remove drain hose following:
- Not remove drain hose
Pulling out the drain pan from back body,
then holding the drain pan with main unit.
- Remove drain hose;
Drain hose can be removed follow the
procedure item 7 . After that remove the
drain pan from main unit.
- Press the drain pan into the back body.
- Please make sure ribs of drain pan in left
and right side must be install to lock position.
- Press the two center arms of drain pan to back
body.
Back body
Rib of drain pan
Drain pan
Back body
3 .
Louver motor
connector
Louver motor connector
Drain pan
Center arms
of drain pan
- 96 -
FILE NO. SVM-19002
Remarks
Screw
Electric part cover
Unit display
Screw
Drain pan
Back body
Rib of drain pan
Drain pan
Connectors