Table of Contents
Advertisement
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Turn the power off.
2. Deeply push in the OPEN
button and open
the FLIP DOWN PANEL.
OPEN button
aN
le. FLAP
Be sure to close the HOLD FLAP for safety
when removing the DCP.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
place.
* The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it
or subject it to strong shocks.
¢ If the FLIP DOWN
PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So close
the FLIP DOWN
PANEL or remove the DCP
to store into the case.
(See figure below.)
DCP case
¢ The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
Note:
¢ /f the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
ARX7370R/ARX7370RW
3
Advertisement
Table of Contents
