Error Displays - Clarion ARX7370R Owner's Manual

9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
TAPE ER1 Tape cannot be played due to defective Eject the tape then replace it with a new one.
tape such as cut tape.
TAPE ER2 Tape is caught and cannot be played. Remove the caught or wound tape.
TAPE ER4 Tape mode cannot be detected. This is a failure of tape mechanism and
consult your store of purchase.
TAPE ER8 Tape is caught and cannot be ejected. Eliminate the reason for whitch the tape is
caught.
CDCH ER2 ACD inside the CD changer is not loaded. | This is a failure of CD changer's mecha-
nism and consult your store of purchase.
CDCH ER3 ACD inside the CD changer cannot be Replace with a non-scratched, non-warped-
played due to scratches, etc. disc.
CDCH ER6 ACD inside the CD changer cannot be Eject the disc then reload it properly.
played because it is loaded upside-down.
EQ ER99 Communication error between main unit Connect the expanded DSP/EQ connecting
and expanded DSP/EQ. cable securely.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
30 ARX7370R/ARX7370RW