Other Handy Functions
Cellular input
When the unit is connected to a cellular telephone
via cable sold separately, the voice from the tele-
phone can be heard from the speaker of unit.
Each time you press No.5 of the Direct buttons
[12] while holding down BAND button [11], the cel-
lular input toggles
between
"TEL
SP-R',
"TEL SP-L', "TEL MUTE" and "TEL OFF".
* The factory setting is "TEL OFF".
@TEL SP-R:
Even if the power is turned on or off to the main
unit, sound is heard from the front right speaker.
@TEL SP-L:
Even if the power is turned on or off to the main
unit, sound is heard from the front left speaker.
@TEL MUTE:
The sound of the unit is muted when the tele-
phone is used.
@TEL OFF:
The sound of the unit is not muted when the tele-
phone is used.
Note:
¢ This function is available only when the phone mute
lead of the unit is connected to the specified lead
of the cellular telephone.
Switching output between non-
fader and subwoofer
The output of the RCA terminal (2ch) on the back
of the unit can be switched.
* The factory setting is Non-Fader output.
Note:
¢ When an expand DSP. expand EQ or other equal-
izer is connected to the unit, Non-Fader output
setting is only available.
1. Press ADJ button [15].
2. Select left or right to select until "NON-F/WOOF"
is displayed using a-selector [2]
3. Select up or down to select "NON-FADER',
"WOOFER 1", "WOOFER 2", "WOOFER 3?" or
"WOOFER 4" using a-selector [2].
@ NON-FADER:
This setting is for connecting a DSP or equalizer.
@ WOOFER 1 to 4:
This setting is for connecting an amplifier for
subwoofer.
* Woofer 1 to 4 indicate the woofer's volume level.
4. Press ADJ button [15] to return to the previous
mode display.
24
ARX7370R/ARX7370RW
Entering titles
Titles can be given to CDs.
* Up to 72 titles can be entered.
1. Play the CD to which you want to give a title in
the CD changer and press TITLE button [14].
2. Select left or right to move the cursor using
a.-selector [2].
a"
m0
THI
T
Mw
Wr a
* Up to 10 characters can be entered.
3. Following characters can be entered.
(Capital letters, Numbers, Symbols)
4. Select up or down to select the characters
using a-selector [2].
5. Repeat steps 2, 3 and 4 to enter a title.
* When more than the specified number of titles
are entered, "TITLE FULL' appears in the display.
6. Push in a-selector [2] for 2 seconds or longer
to store the title. The previous mode display
returns after the title is stored.
TTT)
GC
waar
i
or
tl
(
Clearing titles
1. Select the CD changer mode and press and
holding TITLE button [14| for 2 seconds or longer.
2. Select up or down to select a title to be cleared
using a-selector [2].
3. Push in a-selector [2] for 2 seconds or longer —
to clear the title. The next title appears. If you
want to clear the next title too, repeat steps 2
and 3.
* When
all the stored titles are cleared,
"NO TITLE" appears in the display.
4. After clearing the title, press TITLE button
to return to the previous mode display.