Table of Contents
Advertisement
4.
Insert the connector into the power socket in
the vehicle interior.
5.
With standby or drive readiness turned on,
turn on the compressor and let it run for a
maximum of 10 minutes.
When the tire pressure does not reach at
least 2 bar, contact a manufacturer service
center or another qualified service center or
repair shop.
When a tire pressure of at least 2 bar is
reached, see Minimum tire inflation pressure
is reached.
6.
Unscrew the connection hose of the com‐
pressor from the tire valve.
7.
Pull the connector out of the power socket in
the vehicle interior.
8.
Stow the tire repair set in the vehicle.
Minimum tire inflation pressure is
reached
1.
Unscrew the connection hose of the com‐
pressor from the tire valve.
2.
Pull the connector out of the power socket in
the vehicle interior.
3.
Stow the tire repair set in the vehicle.
4.
Immediately drive approx. 5 miles/10 km to
ensure that the sealing compound is evenly
distributed in the tire.
Do not exceed a speed of 50 mph/80 km/h.
If possible, do not drive at speeds less than
12 mph/20 km/h.
Online Edition for Part no. 01405A38D29 - VI/21
Wheels and tires
Adjustment
1.
Stop at a suitable location.
2.
Screw the connection hose of the compres‐
sor directly onto the tire valve stem.
3.
Insert the connector into the power socket in
the vehicle interior.
4.
Correct the tire inflation pressure to at least
2.0 bar:
▷
Increase tire pressure: with standby or
drive readiness turned on, turn on the
compressor and let it run for a maximum
of 10 minutes.
▷
Reduce tire inflation pressure: press the
button on the compressor.
5.
Unscrew the connection hose of the com‐
pressor from the tire valve.
6.
Pull the connector out of the power socket in
the vehicle interior.
7.
Stow the tire repair set in the vehicle.
Continuing the trip
Do not exceed the permissible maximum speed
of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor.
MOBILITY
327
Advertisement
Table of Contents
