Table of Contents
Advertisement
CONTROLS
Guest profile
In the guest profile, the valet parking mode can
only be deactivated if the valet parking mode was
activated in the guest profile.
1.
Select guest profile.
2.
Enter the PIN that was specified during acti‐
vation.
If the PIN has been forgotten, the valet parking
mode must be deactivated via a personal driver
profile.
Settings
General information
Depending on the vehicle equipment and coun‐
try version, various settings for opening and clos‐
ing are possible.
These settings are stored for the driver profile
currently used.
Unlocking and locking
Doors
1.
"CAR"
2.
"Settings"
3.
"Key button settings"
4.
Select the icon.
5.
Select the desired setting:
▷
"Driver's door only"
Only the driver's door and the fuel filler
flap are unlocked. Pressing again unlocks
the entire vehicle.
▷
"All doors"
The entire vehicle is unlocked.
Confirmation signals from the
vehicle
1.
"CAR"
2.
"Settings"
104
Opening and closing
Online Edition for Part no. 01405A38D29 - VI/21
3.
"Doors/ vehicle access"
4.
Deactivate or activate the desired confirma‐
tion signals:
▷
"Flash when locking/unlocking"
Unlocking is signaled by blinking twice,
locking by blinking once.
▷
With alarm system:
"Sound when locking/unlocking"
Unlocking is confirmed with two sound
signals, locking is confirmed with one
sound signal.
Folding mirrors in automatically
1.
"CAR"
2.
"Settings"
3.
"Doors/ vehicle access"
4.
"Fold mirrors in when locked"
Automatic unlocking
1.
"CAR"
2.
"Settings"
3.
"Doors/ vehicle access"
4.
Select the desired setting:
5. ▷
"Unlock doors when in Park"
▷
"Unlock at end of trip"
After drive-ready state is switched off by
pressing the Start/Stop button, the locked
vehicle is automatically unlocked.
Automatic locking
1.
"CAR"
2.
"Settings"
3.
"Doors/ vehicle access"
4.
"Lock in a few minutes"
The vehicle locks automatically after a while if
no door is opened after unlocking.
Advertisement
Table of Contents
