Table of Contents
Advertisement
MOBILITY
4.
Screw the filler hose of the sealant bottle
onto the tire valve of the nonworking wheel.
5.
With the compressor switched off, insert the
connector into the power socket in the vehi‐
cle interior.
6.
With standby state or drive-ready state
switched on, switch on the compressor.
Let the compressor run for max. 10 minutes to fill
the tire with sealing compound and achieve a tire
inflation pressure of approx. 2.0 bar.
While the tire is being filled with sealing com‐
pound, the tire inflation pressure may sporadi‐
cally reach approx. 5 bar. Do not switch off the
compressor in this phase.
326
Wheels and tires
Online Edition for Part no. 01405A38D29 - VI/21
Checking and adjusting the tire
inflation pressure
Checking
1.
Switch off the compressor.
2.
Read the tire pressure on the tire pressure
display.
To continue the trip, a tire inflation pressure of at
least 2 bar must be reached.
Removing and stowing the sealant
bottle
1.
Unscrew the filler hose of the sealant bottle
from the tire valve.
2.
Press the red unlocking device.
3.
Remove the sealant bottle from the compres‐
sor.
4.
Wrap and store the sealant bottle in suitable
material to avoid contamination of the cargo
area.
Minimum tire inflation pressure is
not reached
1.
Pull the connector out of the power socket in
the vehicle interior.
2.
Drive 33 ft/10 m forward and back to distrib‐
ute the sealing compound in the tire.
3.
Screw the connection hose of the compres‐
sor directly onto the tire valve stem.
Advertisement
Table of Contents
