Table of Contents
Advertisement
CONTROLS
SYNC program
Principle
The Sync program can be used to apply the set‐
tings on the driver's side to the passenger's side.
Switching the SYNC program on/off
1.
"CAR"
2.
"Settings"
3.
"Climate control"
4.
"Synchronize"
The following settings of the driver's side can be
transferred to the front-passenger side:
▷
Temperature.
▷
Air flow.
▷
Air distribution.
▷
AUTO program.
The program is switched off automatically if the
settings on the front passenger side are
changed.
Defrost function
Principle
Ice and condensation are quickly removed from
the windshield and the front side windows.
Switching the Defrost function
on/off
Press the button.
The LED of the button is illuminated
when the system is switched on.
The air flow can be adjusted manually with the
system switched on.
If there is window condensation, switch on the
AUTO program or the air conditioning to utilize
the condensation sensor. Make sure that air can
flow to the windshield.
278
Climate control
Online Edition for Part no. 01405A38D29 - VI/21
Rear window defroster
Principle
Ice and condensation are removed from the rear
window quickly.
Functional requirement
The function is operational when the drive-ready
state is switched on.
Switching rear window defroster
on/off
Press the button. The LED is illumi‐
nated with rear window defroster
switched on.
The rear window defroster switches off automat‐
ically after a certain period of time.
Microfilter/activated-charcoal
filter
The microfilter removes dust and pollen from the
incoming air.
The activated-charcoal filter also removes gas‐
eous pollutants from the outside air that enters
the vehicle.
Have this combined filter changed during vehicle
maintenance.
Ventilation
Principle
The air flow directions can be adjusted individu‐
ally for direct or indirect ventilation.
Setting the ventilation
General information
Open the air vents and position them to ensure
effective climate control.
Advertisement
Table of Contents
