True SPL1300 Owner's Manual page 37

STEP 7—ATTACH PADS TO MAIN FRAME ASSEMBLY
TOOL NEEDED
Allen Wrench
a. Using an allen wrench, attach the head rest pad to the main frame assembly using 2 hex screws and 2 lock washers.
b. Using an allen wrench, attach the seat pad to the main frame assembly using 4 hex screws, 4 lock washers, and 4 fl at
washers.
c. Using an allen wrench, attach the front pad to the main frame assembly using 2 hex screws, 2 lock washers, and 2
bolt sleeves.
ITEM PART
1 SPL-13-MFR350X
2 SPL13PDKT
3 C1257
4 C 749B
5 C 754B
6 C1263
7 SPL-02-PAR110
DESCRIPTION
MAIN FRAME ASSEMBLY
PAD KIT - LOW BACK
LPSHCS, 3/8"-16 X 1-1/4" E-COAT
LOCK WASHER, 3/8", BLK ZP
WASHER, FLAT, 3/8" SAE, BLK
LPSHCS, 3/8"-16 X 2" E-COAT PARTIAL THREAD
SLEEVE, PAD BOLT
QTY
1
1
6
8
4
2
2
37