Warning And Intended Use Labels - True SPL1300 Owner's Manual

WARNING AND INTENDED USE LABELS

WARNING:
!
Replace all labels that may be worn, damaged, or missing.
To replace any worn or missing decals contact TRUE product support (service@truefi tness.com // 800.883.8783).
TRUE FITNESS TECHNOLOGY, INC
865 HOFF RD, ST LOUIS MISSOURI 63366 USA
MODEL NO: SPL1300
SERIAL NO: 22-SPL1300000
SPL-00-LBLSN
LBL-WRN-SPLMAINT
SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT IF
THE PIN IS NOT COMPLETELY INSERTED BEFORE USE.
B2065
MAXIMUM Height
from top of Nut
to Bolt Head.
MAKE SURE locking
nut is tight.
LBL-WRN-SPL021
LBL-WRN-SPL021
MAX
1"
SERIOUS INJURY CAN OCCUR ON THIS
EQUIPMENT. FOLLOW THESE PRECAUTIONS
TO HELP AVOID INJURY.
1.
BEFORE USING: Read and understand all of the warnings
and obtain instruction on the use of this machine.
DO NOT modify the machine.
2.
Get a medical exam before beginning an exercise program.
3.
Keep body and clothing clear of all moving parts.
DO NOT wear anything loose or dangling.
4.
Inspect the machine before use. DO NOT use if it appears
damaged. DO NOT try to fix any machine. Notify staff
immediately.
5.
INSPECT MACHINE DAILY for loose, worn or damaged parts.
Replace any part or label at first signs of wear. Inspect all cables
and their connections closely. If you are in doubt about any part,
DO NOT use the machine until the part is replaced.
6.
Inspect all cables and connections before using the machine.
DO NOT use this machine if any part appears worn or damaged.
7.
Be certain that weight pin is completely inserted. Use only the pin
provided by the manufacturer. If unsure, seek assistance.
8.
NEVER pin weights or top plate into an elevated position.
DO NOT use the machine if found in this condition.
DO NOT try to fix. Seek assistance.
9.
Use only the incremental weights supplied by the manufacturer.
DO NOT use dumbbells or other means to add resistance to
machine.
10.
NEVER allow children near this machine. Supervise teenagers.
11.
DO NOT REMOVE THIS LABEL. REPLACE IF DAMAGED.
ASTM F1749
LBL-WRN-SPL01
DAMAGE TO MACHINE
WILL OCCUR IF KNOB IS
ADJUSTED WHILE USING
MACHINE.
LBL-WRN-SPL022
LBL-WRN-SPL01
LBL-WRN-SP022
13