Ovencontrol,Clock & Timer - Kenmore 911.93551 Owner's Manual

OPERATION
OvenControl,Clock & Timer
• Your new range CLOCK, TIMER, and OVEN operations are simple and easy to
understand,
The HOUR/MIN arrow pads allow you
to set the exact time you need,
The display in the center of your control
wilt show:
1. The time of day CLOCK
2. The amount of time you choose
when using the TIMER.
3. The temperature selection as you
turn the oven control knob.
Your control has individual indicator
lights that will show you the operations
you have chosen.
As you read through your manual, you
will find what each of these indicators
are used for and how they will help you
in understanding your new control_
if the display flashes an "F" followed by
a number and beeps continuously, you
have a function error code_ Note the
number after the "F" Turn the oven
control knob to the OFF position. Allow
the oven to cool for about 1 hour and
retry the oven operation_ If the problem
repeats, call for service Advise the
technician what code was flashing.
When the power to your range is turned
on for the first time, the display wilt flash
the time when the power was turned off,
You can set the clock at this point or
press the clock pad to stop the flashing.
As a safety feature, this oven will
automatically shut off if it has been left
on for more than 12 hours. This feature
can be disabled. See page 11.
Your new control has the special feature
of blacking out the display (have
nothing showing in the display)
To activate this feature:
If the time of day is showing in the
display, press the CLOCK pad once.
To bring back the display from the time
of day blackout, press the CLOCK pad
twice
9