Before Setting Oven Controls; Setting Clock & Minute Timer - Kenmore 790.91010 Use And Care Manual

Before Setting Oven Control
Oven Vent Location
For models equipped with coiled surface elements, the oven vent is located under
the left rear surface element. When the oven is on, warm air flows through the
left rear element. This venting is necessary for proper air circulation in the oven
and good baking results. DO NOT BLOCK THE OVEN VENT.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
Removing & Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up front of rack and slide out. To replace, fit the rack onto the guides on
the oven walls. Tilt the front of the rack upward and slide the rack back into place.
RECOMMENDED RACK POSiTiONS FOR
BROiLiNG, BAKING & ROASTING
Food Rack Position
Broiling meets, chicken or fish f, 2 or 3
Cookies, cakes, pies, biscuits & muffins 3 or 4
Frozen pies, angel food cake, yeast, bread, 4 or 5
casseroles, small cuts of meat or poultry
Turkey, roast or ham 5
Setting Clock & Minute Timer
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, "12:00" will flash in the display
window.
1. Press _.
2. Press in and hold A or v until the correct time appears in the display. A Advances time, v reverses time.