Recording Yourself; Recording With The Built-In Led Video Light (For Pv-Gs31/Pv-Gs35) - Panasonic PV-GS19 Operating Instructions Manual

Selecting the quality of Photoshot
images
1
Set [ BASIC] >> [
[ (High Picture Quality)] or [
Picture Quality)].
35
30
• You can also change the picture quality on [
ADVANCE] >> [
Recording Mode.
Maximum number of still pictures
recordable on an SD Memory card
(optional)
PICTURE QUALITY
32 MB
64 MB
128 MB
256 MB
512 MB
1 GB
• The numbers shown in the table are approximations.
• These figures vary depending on the subject being
photographed.
RapidFire Consecutive Photoshot
The still pictures can be recorded on a Card at regular
intervals.
1
Set [ ADVANCE] >> [
[ON].
35
30
• The [ ] Indication appears.
1 2 : 3 4 : 5 6 A M
J A N 2
2
Press and hold the [PHOTO SHOT] Button
.
25
25
28
Recording Mode
PICT.QUALITY] >>
(Normal
PICT. QUALITY] in the Tape
(High) (Normal)
220 440
440 880
880 1 760
1 760 3 520
3 520 7 040
7 040 14 080
BURST MODE] >>
2 0 0 5
• When [ON] is selected, the still pictures can be
recorded in approximately 0.5 second intervals until
the [PHOTO SHOT] Button is released or 10 pictures
are recorded.
To Stop the RapidFire Consecutive
Photoshot in Progress
Release the [PHOTO SHOT] Button.
• For other notes concerning this item, see page 64.

Recording Yourself

You can record yourself while viewing the LCD
Monitor. You can record persons in front of the
camera while showing them the image. The image is
horizontally flipped as if you see a mirror image. (The
image to be recorded is the same as that recording.)
• Set to Tape/Card Recording Mode.
1
Rotate the LCD Monitor
lens side.
• When the LCD Monitor is opened, the Viewfinder
will be automatically turned off. If the LCD Monitor
is rotated towards the lens side through, then the
Viewfinder will be activated.
• When the LCD Monitor is rotated towards the lens
side, the One-Touch Navigation icon will not be
displayed even if you press the center of the Joystick
Control.
Recording with the Built-in LED
Video Light (For PV-GS31/PV-GS35)
To brighten the natural colors in a scene. Gain Up
mode works with the Built-in Video Light to enhance
the light's brightness.
• Set to Tape/Card Recording Mode.
1
Press the [LIGHT] Button
33
• The Built-in LED Video Light lights and the Gain
Up mode is set to on.
• Gain Up mode will be brighter than when only
the Video Light is on, however, ghost images
will appear.
towards the
2
. 1
33