Adding New Sound On A Video Tape During Video; Suming Xrstinistesnh Her Ahyes Sends Ronetat E H Ection Atcinatc Ened Lies - Sony STR-D2090 Operating Instructions Manual

Coli tiavem- Mare (-temelel bl cer-)
Adding New Sound on a Video Tape during
Aitel=tom =tel i tfare] F 6 Release the pause mode of the playback VCR
:
and set the VCR 1 to the recording mode.
During video tape editing, you can add the desired sound
on the recording VCR from various audio program sources.
7 Start playback of the selected audio program
source.
Video dubbing starts and the audio program source
is also recorded on the VCR 1 simultaneously.
=™ Video signals
= Audio signals
POWER — ON
to VIDEO 2 VIDEO OUT/
VIDEO IN AUDIO OUT
1
1 Select the playback VCR with EDIT VIDEO.
To select VCR 2, press EDIT VIDEO so that "2> 1"
appears on the display.
To select VCR 3, press EDIT VIDEO so that "3> 1"
appears on the display.
2 Set the playback VCR to the playback mode.
3 At the point where audio dubbing starts, press
the pause button on the playback VCR.
4 Press EDIT AUDIO.
AUDIO appears on the display.
5 Select the audio program source.
28