Table of Contents
Advertisement
Receiving Broadcasts
Tuning in a Preset Station (Preset Tuning)
There are two ways to perform the preset tuning.
In the method A, the direct tuning, select by designating the
desired preset station number directly with the numeric
button. In the method B, the scan tuning, select the preset
station with the PRESET -/+ button.
Method A: Direct tuning
1 Press TUNER.
Frequency or the station index name you created is
displayed.
The FUNCTION buttons change to the numeric
buttons.
2 Select the memory page (A, B, or C).
Each time SHIFT is pressed, A, B or C is indicated
cyCclicallly.
3 Designate the desired preset station number with
the numeric button.
22
Method B: Scan tuning
Frequency or the station index name you created is
displayed.
The FUNCTION buttons change to the numeric
buttons.
2 Select the desired preset station with PRESET
TUNING
-or +.
:
PRESET TUNING
For a lower
e
preset number
For a higher
preset number
IMPORTANT
The memorized station is maintained for approximately one
month even if the power cord is disconnected from the AC
power outlet. If they are erased, store the stations again.
Advertisement
Table of Contents
