Solutions To Common Problems; If You Cannot Connect To The Logic Analyzer - HP 1670A Series User Manual

Solutions to Common Problems
This section describes common problems you may encounter when
using the logic analyzer LAN. It assumes you have been able to
connect to the logic analyzer in the past. If this is not so, refer to the
previous section first.
If you cannot connect to the logic analyzer
If you suspect a bad LAN connection between your computer and the logic
analyzer, you can verify the network connection by using the ping command
or another similar echo request utility.
If a bad connection is revealed:
D Make sure the logic analyzer is on.
D Check the physical connection to the LAN.
D Make sure the Internet (IP) Address of the logic analyzer is set up
correctly in the LAN Settings menu under System External 1/0.
D If the logic analyzer and the computer are on different networks or
subnets, make sure the Gateway Address in the LAN Settings menu is
set to the address of the gateway machine. Get the address of gateway
machine from your system administrator.
7-21
I