Lexmark ST9822 User Manual page 67

Understanding the printer menus
Menu item
Scanner Configuration
Edge Erase
ADF Edge Erase
0–6 (3*)
Flatbed Edge Erase
0–6 (3*)
Scanner Configuration
Disable Scanner
Enabled*
Disabled
ADF Disabled
Scanner Configuration
Tiff Byte Order
CPU Endianness*
Little Endian
Big Endian
Scanner Configuration
Exact Tiff Rows Per Strip
On*
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Out of Service Erase
Menu item
Out of Service Erase
Memory Last Sanitized
Hard Disk Last Sanitized
Out of Service Erase
Sanitize all information on nonvolatile memory
Erase all printer and network settings
Erase all apps and app settings
Erase all shortcuts and shortcut settings
Out of Service Erase
Sanitize all information on hard disk
Erase downloads (Erases all macros, fonts, PFOs,
etc.)
Erase buffered jobs
Erase Held Jobs
Description
Set the size, in millimeters, of the no‑print area around an ADF
or flatbed scan job.
Disable the scanner if it is not working properly.
Determine the byte order of a TIFF‑formatted scan output.
Set the RowsPerStrip tag value of a TIFF‑formatted scan output.
Description
Show information on when the printer memory or hard
disk was last sanitized.
Note: Hard Disk Last Sanitized appears only in printers
with a hard disk installed.
Clear all settings, shortcuts, and applications that are
stored in the printer memory.
Clear all downloads, buffered jobs, and held jobs that are
stored in the printer hard disk.
Note: Sanitize all information on hard disk appears only
in printers with a hard disk installed.
66