Lexmark ST9822 User Manual page 60

Understanding the printer menus
Menu item
E‑mail Alerts Setup
E‑mail Setup
User‑Initiated E‑mail
None
Use Device SMTP Credentials
Use Session User ID and Password
Use Session E‑mail address and
Password*
Prompt user
E‑mail Alerts Setup
E‑mail Setup
Use Active Directory Device Credentials
Off
On*
E‑mail Alerts Setup
E‑mail Setup
Device Userid
E‑mail Alerts Setup
E‑mail Setup
Device Password
E‑mail Alerts Setup
E‑mail Setup
Kerberos 5 REALM
E‑mail Alerts Setup
E‑mail Setup
NTLM Domain
E‑mail Alerts Setup
E‑mail Setup
Disable "SMTP server not set up" error
Off*
No
Error Prevention
Jam Assist
Off
On*
Error Prevention
Auto Continue
Off
On* (5 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set whether credentials are required for user‑initiated e‑mails.
Note: This menu item appears only in some printer models.
Enable user credentials and group designations to connect to
the SMTP server.
Note: This menu item appears only in some printer models.
Specify the user ID to connect to the SMTP server.
Note: This menu item appears only in some printer models.
Specify the password to connect to the SMTP server.
Note: This menu item appears only in some printer models.
Specify the realm for the Kerberos 5 authentication protocol.
Note: This menu item appears only in some printer models.
Specify the domain name for the NTLM security protocol.
Note: This menu item appears only in some printer models.
Disable an SMTP setup error message to appear on the
display.
Note: This menu item appears only in some printer models.
Set the printer to flush blank pages or pages with partial prints
automatically after a jammed page has been cleared.
Let the printer continue processing or printing a job
automatically after clearing certain printer conditions that
require user intervention.
59