Lexmark ST9822 User Manual page 124

Understanding the printer menus
Menu item
HTTP Proxy IP Address
FTP Proxy IP Address
HTTP Default IP Port
1–65535 (80*)
HTTPS Device Certificate
FTP Default IP Port
1–65535 (21*)
Timeout for HTTP/FTP
Requests
1–299 (30*)
Retries for HTTP/FTP Requests
1–299 (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.
ThinPrint
Menu item
Enable ThinPrint
Off
On*
Port Number
4000–4999 (4000*)
Bandwidth (bits/sec)
0*
100–1000000
Packet Size (kbytes)
0–64000 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Note: This menu appears only in some printer models.
Menu item
PCL SmartSwitch
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the HTTP and FTP server settings.
Specify the amount of time before the server connection stops.
Set the number of retries to connect to the HTTP/FTP server.
Description
Print using ThinPrint.
Set the port number for the ThinPrint server.
Set the speed to transmit data in a ThinPrint environment.
Set the packet size for data transmission.
Description
Set the printer to switch to PCL emulation when a print job received through a
USB port requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
123