Casio SF-4300B Owner's Manual page 41

PART 6 Data Communications
To send one Schedule Keeper eniry
-
fon
as
78
While the initial, Schedule Keeper screen is displayed, press FUNC twice to
display the second function menu.
. Press 4 to select DATA COMM.
. Press 1 to select SEND.
. Press 1 to select ONE ITEM.
. Use index search, initial character search, or mode eeaich to find the
Schedule Keeper item you want to send.
display.
You cannot send Reminder Mode dala listed under a Schedule Keeper date.
Use the procedure on page 77 to send a single Reminder Mode data item.
.. Press DISP GHNG to switch to the data display of the selected entry.
. Préss SET to start the send operation or ESC to abort the operation wire
sending anything.
<eg SENDING
DATA
TG_STOP
Ke> PRESSCESC)
-To abort the send operation at any time, press ESC.
if an error occurs during the send operation, the message "TRANSMIT
ERRCR"" appears on the display. Press ESC to clear the error message.
. To interrupt a data transfer operation, press ESC.
ce
Sending Data ears
To send one month of Calendar data (highlights)
i.
* Wh
. Press 4 to select DATA COMM.
. Press 1 to select SEND.
. Press 1 to select MONTH.
Display the calendar whose hightights you want to send.
. Press SET to start the send operation or ESC to abort the operation without
sending anything.
Ctaecag SENDING
DATA to stop
le=—> PRESSCESC)
If the corresponding calendar in the receiving unit already contains high-
lighted dates, the received data is ignored. You have to clear the correspond-
ing data in the receiving unit before it can receive highlight data.
To abort the send operation at any time, press ESC.
[f an error occurs during the send operation, the message "TRANSMIT
ERROR" appears on the display. Press ESC to clear the error message.
To interrupt a data transfer operation, press ESC.
To send all Telephone Directory, Memo Mode, or
Reminder Mode data
t.
Form
You can perform the following operation while in the open memory area:
or the secret memory area.
Press 4 to select DATA COMM.
Press 1 to select SEND.
Press 2 to select MODE DATA.
79