Using The Calendar; To Display The Calendar; To Display A Calendar From The Calculator; To Specify A Month Ior Display In The Calendar Mode - Casio SF-4300B Owner's Manual

PART 3 Data Management Functions
'Using the Calendar
30
The calendar is pre-programmed to display full-month calendars of any month
from January 1907 through December 2099.
You can enter 20th century years using only two digits (94 —> 1994). 21st century
years must be entered in four digits.
Helpful markers appear on the calendar display to show you for what days during
the month you have appointments scheduled.
To display the calendar
To enter the Calender Mode, select the Calendar Mode icon from the main menu
screen.
e The dates on each calendar are shown starting from Sunday (on the fax left)
through Saturday (on the far right).
« The above procedure displays the calendar that contains the date currently
set in the Home Time display.
« If you enter the Calendar Mode while the Home Time display is shown, the
calendar appears with the current date flashing within the calendar.
e When you enter the. Calander Mode right after you are in the Schedule
Keeper, the calendar that contains the Schedule Keeper date you were
viewing appears. In this case, the Schedule Keeper date you were viewing
appears flashing within the calendar.
To scroll through calendars
i. Enter the Calendar Mode.
2. Usethe A and Y cursor keys to scroll sequentially through the calendars.
Holding down either key scrolls at high speed.
e The above procedure works only when the date cursor is not flashing in the
catendar. To clear the date cursor from the calendar, press ESC.
Using the Calendar
The date cursor flashes at a date in a calendar to indicate that the date
is selected.
If a calendar is already shown on the display, press the [> cursor key
to make the date cursor appear at the first date in the calendar, or the
<J cursor key to make it appear at the last date in the calendar. You can
also make the date cursor appear at any specific date within a displayed
calendar by entering that date. For example, pressing 1 2 causes the
12th to start flashing in the displayed calendar.
You can move the date cursor around the calendar using the A, Y, <1,
and [> cursor keys. If you press the <J cursor key while a far feft date
(Sunday) is selected, the date cursor moves up one line, to the far right
date (Saturday). If you press the [> cursor key while a far right date
(Satlirday) is selected, the date cursor moves down one line, to the far
left date.(Sunday).
If you press the A cursor key while a date in the top line of a calendar
is selected, the display changes to the previous month, with the date
cursor located in the bottom tine. If you press the V7 cursor key while
a date in the bottom line of a calendar is selected, the display changes
to the faltowing month, with the date cursor located in the top line.
Holding down any of the cursor keys moves the date cursor at high
speed.
To clear the date cursor from a calendar, press ESC.
To display a calendar from the Calculator
1.
2.
Enter the Calculator made.
Input the year, press DATE/TIME and then input the month of the calendar you
want to display. Finally, press MENU and select Calendar Mode icon.
To specify a month for display in the Calendar mode
1
2.
3.
4.
While a calendar is displayed, press CLEAR.
Input the year of the calendar you want to display and press DATE/TIME...
Input the month of the calendar you want to display.
31