Casio SF-4300B Owner's Manual page 20

36
JUL/"2971994 FRI
$:00q WORK
@ ms 23
Schedule Keeper
data entry
To input Schedule Keeper data —
a6
. Press DATE/TIME again.
Using the Schedule Keeper CQ
e Tocreate a Schedule Keeper data entry with a start time and description only
(without any end time), press [> (to advance directly to step 7) instead of
DATE/TIME.
e While the above screen is displayed, pressing <] returns to the display in
step 3 above, and pressing [> changes to the display in step 7.
5. Input the ending time of the appointment, pressing DATE/TIME between the
hour and the minutes.
6. Press ae
Start time
description of
End time appointment
* While the above screen is displayed, pressing the <] cursor key returns to the
display in step 5 above.
7 Inout a description of the appointment.
8. After inputting the data, press SET to store it into memory.
Using Schedule Alarms
You can set schedule alarms for Schedule Keeper data entries to.help you keep
on time for important appointments. When a schedule alarm time is reached, an
alarm sounds for 20 seconds and the corresponding Schedule Keeper data
appears on the display (even if the SF Unit is switched off). Press any key to stop
the alarm and then press ESC to return to the display that was shown before.
the alarm began to sound.
37