To Display The Main Menu Scteen; To Input Letters And Numdbes; To Input Upper-Case Letters 20 - Casio SF-4300B Owner's Manual

PART 2 Operation Reference
li To switch the key input tone on and off
Press FUNC once to display the first function menu.
Press 4 to select the SOUND menu item.
Use A and V to select KEYS.
.Use <1 and [> to switch the key input tone on and off.
Press SET to store your setting and clear the SOUND menu.
gaan —
@ To display the main menu screen
Press MENU to display the main menu screen.
Main Menu Screen
Menu Icons
@ Telephone Directory Mode @ Schedule Keeper Mode
@ Memo Mode © Catendar Mode
@ Reminder Mode @® Calculator Mode
To change modes
You can change modes either by selecting an icon or by inputting a number.
: To change modes by selecting an icon
. Display the main menu screen.
. : The icon of the currently selected mode is highlighted on the display. Use
18
A, VY, <J, and > to change the selected menu icon.
3. When the icon for the mode you want is selected (highlighted), press SET.
@ To change modes by inputting a number
1. Display the main menu screen.
2. Input a number from 1 to 6 to specify the mode you want to enter.
inputting Letters, Numbers, and Symbals
e To enter the Timekeeping Mode, press HOME/WORLD. You cannot
select this mode from the main menu screen. 7
¢ Note that whenever you switch power on, the initial screen that appears
is not the main menu screen, but rather the mode that you were in when
you last switched power off.
inputting Letters, Numbers, and Symbols
The following describes the basic input operations for the SF Unit. Note that
you can use the following operations to input data only in the Telephone
Directory, Memo Mode, and the Schedule Keeper. In all of the following
operations, the input or correction is performed at the current cursor location.
To move.the cursor around the display, use the A, 7, <J, and > cursor keys.
Press SHIFTand then <] to make the cursor jump te the first character of an entry,
or SHIFT [> to jump to the end of an entry.
Note
The maximum number of characters you can input for each data item is 384.
When the number of characters you are inputting in the current data item exceeds
374, the shape of the cursor changes from "_" to "I'. This indicates that you can
input 10 more characters in the current data item.
@ To input letters and numbers
Press the key that is marked with the letter or number that you want to input.
To input upper-case letters
Press CAPS to switch the keyboard between upper-case and lower-case letters.
The indicator "CAPS" on the display shows that the ae is shift-locked
for upper-case letters.
e The upper-case/lower-case setting you make with CAPS remains in effect
until you, change it, even when you switch the SF Unit off.
¢ A shift-lock operation using CAPS affects the letter keys only. It does not
shift the number keys for punctuation symbol input.
19