Toyotomi SEN ion TDE-16SGI21 User Manual page 50

DEHUMIDIFIER
3. Fan Button
Press this button to switch from High fan speed to Low fan speed. When you
need fast dehumidifi cation, select high fan speed. When you need the unit to
work quietly, select low speed.
Lock Function: Hold Fan button for 3 seconds to enter or exit child lock
status. When the unit enters child lock status, the display window will fl ash
"LC" 3 times. At this time, pressing other buttons will be invalid and "LC" will
be displayed.
4. Timer Button
Press this button to make the unit work on designated time. The timer function
takes hour as unit, and 0-24h can be circularly set. Duration of timer can be
transitorily displayed on the panel.
5. Filter Button
Press this button to turn off Filter cleaning indicator. When dehumidifi er has
been operating for 250 hours, Filter cleaning indicator will be lit up to remind
user of fi lter cleaning.
6. Ion Button
Ion
Under dehumidifi cation mode, it's defaulted that Ion function is turned on.
Press this button once only to turn off or turn on the Ion. Hold this button
for 3 seconds to enter or exit single Ion mode. Under single Ion mode, the
dehumidifi cation function will be off, and the display window will display "- -».
7. Display/Control Panel
The humidity display window is defaulted to display current environment
humidity level. If press humidity button to adjust the humidity, it will display the
set humidity. 5 seconds later, it will turn back to display the ambient humidity.
GB
50