Pioneer XC-IS21MD Operating Instructions Manual page 19

Listening to a Radio Broadcast
'| FREQ/STATION
To change display modes
Station call means to receive {tune in) stations which have been
preset in the station memory.
1. Press the FREQ/STATION button to select the station
mode.
@ When using the remote control, you can perform station
call by pressing the w4/>si button. There is no need to
press the FREQ/STATION button.
2. Press the "< or p> button to select the desired sta-
tion.
@ The remote contro! unit's digit buttons can be used to select
the station. Press the digit button corresponding to the station
number while the unit is in the TUNER function mode.
To select a station number of 11 or higher, use the [510] button
(same as CD Direct Play on page 25).
NOTES:
@ You can press the FREQ/STATION button to see the station No.
or frequency.
@ The memorized stations will not be erased even if the power is
turned off. Even if the AC power cord is unplugged, or there is
8 power failure, stations remain in memory for several days.
@ if the memorized stations have been erased, memorize them
again.
DISPLAY/RDS
ICD MD Tuner) DISP [CD Tuner Deck} Disp |
When using the tuner function:
shown:
During broadcast reception
ID Station frequency
(Station number}
(RDS displays)
{2 Current time
From Tuner to MD
(display during re-
cording)
}
| From Tuner to Tape |
{display during re-
cording)
DD Station frequency
{Station number)
(RDS displays)
2 MD track name
Scroll display
= MD recording track
number and
recording time
v
"4 MD recording track
number and
remaining recording
time
Current time
Y) Station frequency
{Station number)
(RDS displays)
(2] Tape counter
'3] Current time
19
En