Table of Contents
Advertisement
CA-MX55MBK
|
DISC INTRO mode
Play the first track of each of the discs in the CD Automatic Changer from
the disc on Disc No.1 to 6, for 15 seconds.
INTRO mode
Play the beginning of each track of the discs in the CD Automatic Changer
from the disc on Disc No.1 to 6, for 15 seconds.
ce
Notes:
To cancel the INTRO play
mm
2. Press the INTRO button and turn the Indicator off.
Note:
Programmed Play
The PROGRAM indicator lights.
PRGM
12
14 (No. 20342)
3.
Press the DISC button and select a disc.
The AL indicator flashes on the display.
O- O- O- O- O- O-
if you use the Remote Controller, press the CD CHANGER button and
then specify one of 1 to 6 with numeric keys.
1
2
3
Doc
The AL indicator shows that all the tracks on the selected disc have
been selected. If you press the MEMORY button while the AL indicator
is flashing, all the tracks on the disc are programmed.
GD CHANGER
. Press the 4 or >>I button and select a track.
The step and the selected track flash on the display.
ac
ifyou use the Remote Controller, press the CD 10 KEY button, and then
specify a track with numeric keys.
1
2
3
Ca a
Co GE
CONTINUE
_PRGM
Select a track while the AL. indicator is flashing on the display.
CD 10KEY
. Press the MEMORY button on the CD Automatic Changer. The
step and the selected track will light on the display. .
The CD Automatic Changer will wait for selection of the next track.
MEMORY
Cl
. Select a track by repeating steps 3 to 5.
You can program up to 32 tracks.
Perform steps 3 to 5 while the display is flashing. If the display stops
flashing and lights as follows, perform step 3 and subsequent steps
again.
1
so
ee
ee
mw
TE
0:00
Press the PLAY/PAUSE button on the CD Automatic Changer.
Playback begins with the first track in the program.
Advertisement
Table of Contents
