JVC CA-MX55MBK Manual page 10

CA-MX55MBK |
AC power connection
8
10 (No. 20342)
1. Remove the battery compartment lid.
Press the lid and slide it in the direction of the arrow.
2. Insert the batteries.
Use two UM-4/AAA (24F)/RO3 size batteries.
Make sure the + and — polarities on the batteries and compartment are
the same.
3. Attach the Ild.
Press the lid and slide it in the direction of the arrow.
Note:
¢ Batteries installed incorrectly may burst of leak. Pay attention to the
following:
¢ When the Remote Controller is not in use for a long period of time,
remove the batteries.
¢ Donot mix old and new batteries.
* Dono mix batteries of different types, even if their shapes are the
same.
* When batteries become weak, the operating distance ofthe Remote
frantesilar memanths eneliinad HH mand th raningan tha
WVYVUHUUNTL is greauy reaucsea and you Wit Hite Ww lGpliave iG
batteries.
Caution: To prevent electric shock, turn all stereo components off before
you install or remove power cords.
Important! Before you plug the power cord into an outlet, make sure that
all stereo components are connected correctly.