Programming Summary of Preparation
You can program the following functions. See the page numbers below for
details.
Press
(function)
to enter the programming mode.
The display shows the number of
recorded messages.
To set
day,
see page 10.
To set
hour of day,
see page 10.
To set
minutes,
see page 10.
To select
the number of rings,
see page 12.
To set
the remote code,
see page 19.
Press
(SKIP/FF)
or
[REPEAT/REW]
for the desired settings.
When finished, press
(FUNCTION).
•You can exit the programming mode any time by pressing
(STOP)
or
waiting for 60 seconds.