Table of Contents
Advertisement
Programming Summary for Answering System
You can program the following functions using the handset near the
base unit. See the corresponding pages for function details.
Make sure the unit is not being used and the handset is lifted off the
base unit.
Press
(PROGRAM)
Press
(FLASH/CALL!WAIT/PLAYBACK)
To adjust the day and time, press
To set the remote code, press
To select the number of rings, press
To select the line mode, press
To select the caller's recording time, press
•The base unit display shows numbers or characters related to the adjustment
or settings.
Press
(PROGRAM)
•A beep sounds from the base unit.
•You can exit the programming mode any time by pressing (OFF)
•If you do not press any buttons for 60 seconds, the unit will exit the programming
mode.
For assistance, please call: 1-800-211-PANA(7262)
.
•If an alarm tone sounds, move closer to the
base unit and try again.
.
(1)
.
(3)
.
.
.
(0)
.
(2)
.
(5)
(page 18)
(page 35)
(page 20)
(page 13)
(page 19)
.
17
Advertisement
Table of Contents
