Table of Contents
Advertisement
Muratec
Erase Your TTI
You can erase your
TTI
if you wish. Just remember that
you'
ll need to have one if
you send any fax
documents.
To erase your
TTI:
1. Press
~/Program,
I, 2, Mode/Enter.
2. Here, your choices are to cancel
this
operation (i.e.
,
not
to
erase
the
TII) or
to
go ahead and erase the TII. To cancel, press
~/Program.
To go ahead
and
erase, press
Mode/Enter.
Eras
e
Your TTI
Check Program/Enter
Print Your TTI
If
you want to
print
and review your TTI:
1. Press
~/Program,
I, 3, Mode/Enter.
2. Here, your choices are to cancel this operation (i.e., not to print the TII) or to
go ahead and print the TII. To cancel, press
~/Program.
To go ahead and
erase, press
Mode/Enter.
20
13 Pr
i
nt Your TTI
Program/Enter
Operating Instructions
Set Primary {Transmission) Mode
Your fax offers four standard transmission modes
-
three resolution options, plus
grayscale
-
so every
document
arrives looking its best. See page 3 for more
information on resolution and grayscale.
Note:
This setting has no effect on the
faxes
you
receive. The sending
fax
machine controls the
resolution
of
the
received fax document.
With this setting, you tell your fax which transmission mode
-
normal, fine,
superfine
(shown
on the display as
"
S Fine") or grayscale ("Gray" ) -you
use
most often.
Note:
This setting lets you select grayscale, but not which of the two grayscale
modes
-
16-level or 64-level - you
will
use.
To
make
that
choice, see
"Set
Grayscale," next page.
You
always
can change the resolution before sending (see the note following step
3),
but this will be your default. To set the primary transmission
mode:
1.
Press
~/Program,
J, 0, 3, Mode/Enter.
Primary
:
Norma
l
Program/Enter
2. Press
~/Program
until your chosen mode appears.
{In this
example,
we've
chosen superfine.)
Primary
:
S
Fine
Program/Enter
3. Press
Mode/Enter
to select your choice.
Note:
Any time you wish to override
this
primary transmission mode choice,
enter the document you wish to fax and press
Mode/Enter
until the display
shows the mode you want. The transmission mode appears as the second
item from
the
left on the second
line.
Document
Ready
100%
A4
SF
i
ne
Normal
(The right side shows the contrast setting. For more information on the
contrast, see
"Sending
a Fax," page 31.)
Muratec
Advertisement
Table of Contents
