To Capture An Address - HP E2465A PowerPC 604 PGA User Manual

To capture an address
Analyzing the PowerPC 604
Trigger Menu
To accurately trigger on a specific address, enter the address in the ADDR
field of a trigger term and also enter 0 in the AACK field of the term. This will
ensure against false triggering on a floating address bus.
The instruction addresses presented on the PowerPC 604 address bus always
end in hex 0 or hex 8. When the instruction cache is enabled, the 604 will
burst four data beats per address and will not update the address as it bursts.
To accurately trigger on the fetch of a particular address when bursting, the
least significant five bits of the address should be "don't cares. " Change the
base of the ADDR label to Binary to enter the 5 X's.
E2465A PowerPC 604 PGA Preprocessor
2-11