DP-7010
DP-7010
DISASSEMBLY FOR REPAIR
DISASSEMBLY FOR REPAIR
you.
1. Removing of the operation unit
4.
* Take out the case beforehand.
1. Undo the two catches (@) of the tray panel, then
detach the tray panel sliding it upwards (@).
2. Push in the tray in the direction of arrow | @).
3. Remove the four screws ( @) in the downside of the
panel and the two screws (@) in the upside of the
panel, then undo the two catches ( @) in the upside,
and take out the front panel in the direction of an
arrow towards you.