Advertisement
DP-7010
SYSTEM CONNECTIONS
Do not put the plug into the socket until the connecting is completed.
Connect having selected one of @.
®
or ©
below.
An accessory audio cord
7
Amplifier
An optical fiber cable
DIGITAL IN
OPTICAL COAXIAL
AC voltage selector switch
(except for some areas)
DP-7010
To wali AC outlet
A digital connecting cord
DIGITAL OUTPUT
OPTICAL
COAXIAL
G0
Remove the caps.
(@)
@ Fixed output (FIXED):
Output voltage is fixed to 2 Vrms. Use these stereo
output jacks for connection to @ typical amplifier
or
receiver.
@ Variable output (VARIABLE)
.
The output level of the head phones and the VARIABLE
output lavel can be changed simultaneously by means
of the OUTPUT
LEVEL keys on the front (.¥,. [a)) or
remote
control.
The output levels are indicated on the display.
Use this when you want to match the output levels
with
other equipment.
"
@ DIGITAL OUTPUT COAXIAL
This terminal is for outputting the audio signals in the
original digital code.
Do not connect it to anything other then the digital input
terminal of the amplifier because this could risk damag-
ing the amplifier and speaker.
@ DIGITAL OUTPUT OPTICAL
This terminal is for converting and outputting the audio
signals from digital to optical.
Connect it to the digital amplifier attached to the optical
input terminal. When
using this terminal. remove the
protective cap.
OUTPUT LEVEL keys ([¥] .[4])
Damper
Viewed from the side
Hard surface
Strut suspension
Strut suspension adjustment
Optical fiber cable
@ Connecting power cord
PHONES
|
j lv OUTPUT
LEVELA
a
cae
|
|
Advertisement
