Table of Contents
Advertisement
OPERATING THE AUDIO/VIDEO COMPONENTS
Press the power switch to the ON position, and turn on the power to
the other components you wish to use (for example, TV, VCR,
cassette deck, etc.).
1. Use the input selector buttons to select the desired program
source.
Program Source
input Selector
To watch a video cassette tape on
VCR 1
the VCR connected to VCR 1 jacks.
To watch a video cassette tape on
VCR 2
the VCR connected to VCR 2 jacks.
'
To watch a VCR connected to VIDEO
VIDEO
INPUT jacks of front panel.
To watch the TV picture from a TV
tuner connected to the TV/SAT jacks.
TVISAt
To watch a LaserDisc.
LO
To listen to a tape on the cassette
TAPE 1
deck connected to TAPE 1 jacks.
To listen to a tape on the cassette
deck {or digital audio tape deck)
TAPE 2 MONITOR
connected to TAPE 2 MONITOR jacks.
To listen to records.
PHONO
To listen to compact discs.
cD
*If you select a music source other than TAPE 2, switch OFF the
TAPE 2 MONITOR.
2. Operate
the appropriate
audio/video
component
to play
back the program source.
¢ For a video source, switch the TV connected to this unit to the
video input mode.
3. Adjust the volume and tone controls as desired.
© Refer to page 25 for details concerning surround operation.
®Refer
to
page
47
for
details
concerning
sound
quality
adjustment.
23
<ARB1489>
Advertisement
Table of Contents
