Screen Maintenance - AOC AGON PRO User Manual

Screen Maintenance

Based on the characteristics of the OLED product, screen maintenance should be carried out according to the following
requirements, so as to reduce the risk of generating image retention.
The warranty does not cover any damage resulting from non-compliance to the following instructions.
• Displaying a still image should be avoided as much as possible.
A still image refers to an image which remains on the screen for a long time.
A still image may result in permanent damage to the OLED screen,image residue appears, which is the feature of OLED
screen.
The following suggestions on use should be abided by:
1. Do not display any still image in full screen or part of the screen for a long time, because this will lead to screen image
residue. To avoid this problem, please reduce the brightness and contrast of the screen appropriately when displaying
still image.
2. When watching a 4:3 program for a long time, different marks will be left on the left and right sides of the screen and
the edge of the image, so please do not use this mode for a long time.
3. Whenever possible, watch a video in full screen, rather than in a small window on the screen (such as a video on an
Internet browser page).
4. Do not put labels or stickers on the screen to reduce the possibility of screen damage or image residue.
• It is not recommended to continuously use this product for more than four hours.
This product uses many technologies to eliminate possible image retention..It is highly recommended that you
use the preset values and keep the functions "on" to avoid image residue on the OLED screen and maintain the
best use of the OLED display.
• LEA (Logo Extraction Algorithm) (Prevention of local image retention)
To reduce the risk of generating image retention, it is recommended to enable the LEA function.
After this function is enabled, the screen will be automatically narrowed to fix the brightness of the display area, so as to
reduce possible image retention.
This function is "On" by default, and can be set in the OSD menu.
• TPC (Temporal Peak Luminance Control)
To reduce the risk of generating image retention, the luminance of the screen automatically lowers greatly when a still
image is displayed for a long time so as to avoid possible image retention.
This function is "On" by default, and cannot be disabled.
• Orbit (Image shift)
To reduce the risk of generating image retention, it is recommended to enable the Orbit function.
After this function is turned on, image pixels circularly move as a whole once a second in a trajectory shaped like a
Chinese character " 日 ." The movement amplitude is based on the settings. The moved character may be side cut. When
"Strongest" is selected, image retention is most unlikely generated, but possible side cut may be most notable. When "Off"
is selected, the image will go back to the optimal position.
This function is "On" (Weak) by default, and can be set in the OSD menu.
• CPC (Convex Power Control)
To reduce the risk of generating image retention, this function can automatically adjust power gain for different images.
Power control follows a convex mathematic model which is high in the middle and low on two sides, so as to reduce
possible image retention.
This function is "On" by default, and cannot be disabled.
14