Pip Setting - AOC AGON PRO User Manual

PIP Setting

Note:
1) When "HDR" under "Brightness" is set to non-off state, all items under "PIP Setting" cannot be adjusted.
2) When PIP/PBP is enabled, some color-related adjustments in the OSD menu are valid only for the main screen, while
the sub-screen is not supported. Hence, the main screen and the sub-screen may have different colors.
3) Set the input signal resolution to 1280X1440@60Hz at PBP to achieve the desired display effect.
4) When PBP/PIP is enabled, the compatibility of the main screen/sub-screen input source is shown in the following
table:
PBP/PIP
HDMI1
HDMI2
Sub source
DP1
DP2
PIP Setting Off / PIP / PBP
Main Source
Sub Source
Size Small / Middle / Large
Right-up
Right-down
Position
Left-up
Left-down
On: PIP Audio
Audio
Off: Main Audio
On: Swap
Swap
Off: non action
Main source
HDMI1 HDMI2
V V
V V
V V
V V
Disable or Enable PIP or
PBP.
Select main screen source.
Select sub screen source.
Select screen size.
Set the screen location.
Disable or Enable Audio
Setup.
Swap the screen source.
DP1 DP2
V V
V V
V V
V V
23