Instructions For Maintenance Of The Oled Monitor Screen - AOC AGON PRO User Manual

Instructions for maintenance of the OLED monitor screen

Based on the characteristics of the OLED product, screen maintenance should be carried out according to
the following requirements, so as to reduce the risk of generating image retention.
The warranty does not cover any damage resulting from non-compliance to the following instructions.
• Displaying a still image should be avoided as much as possible.
A still image refers to an image that remains unchanged for a long time in full screen or partial screen.
Still images may cause the OLED screen to be permanently damaged, resulting in image residue, which is a
characteristic of OLED screens.
The following suggestions on use should be abided by:
1. Do not display any still images on the monitor screen for a long time in full screen or partial screen,
because this will lead to screen image residue. To avoid this problem, please appropriately reduce the
brightness and contrast of the screen when displaying still images.
2. When watching a 4:3 program for a long time, different marks will be left on the left and right sides of the
screen and the edge of the image, so please do not use this mode for a long time.
3. Watch videos in full screen as much as possible, not in a small window on the screen (such as videos on
an Internet browser page).
4. Do not stick labels or stickers on the screen to reduce the possibility of screen damage and image residue.
• It is not recommended to continuously use this product for more than four hours.
This product uses a variety of technologies to eliminate possible image residue. It is strongly
recommended that you adopt the default values and keep all functions in the "ON" state, so as to
avoid image residue on the OLED screen and maintain the optimal use state of the OLED monitor.
• LEA (Logo Extraction Algorithm) (Prevention of local image retention)
To reduce the risk of generating image retention, it is recommended to enable the LEA function.
After this function is enabled, the screen will be automatically narrowed to fix the brightness of the display
area, so as to reduce possible image retention.
This function is "On" by default, and can be set in the OSD menu.
• TPC (Temporal Peak Luminance Control)
To reduce the risk of generating image retention, the luminance of the screen automatically lowers greatly
when a still image is displayed for a long time so as to avoid possible image retention.
This function is "On" by default, and cannot be disabled.
• Orbit (Image shift)
To reduce the risk of generating image retention, it is recommended to enable the Orbit function.
After this function is turned on, image pixels circularly move as a whole once a second in a trajectory shaped
like a Chinese character " 日 ." The movement amplitude is based on the settings. The moved character may
be side cut. When "Strongest" is selected, image retention is most unlikely generated, but possible side cut
may be most notable. When "Off" is selected, the image will go back to the optimal position.
This function is "On" (Weak) by default, and can be set in the OSD menu.
8